Offshoreonly.com - looking for a hull only

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Boating Discussion (https://www.offshoreonly.com/forums/general-boating-discussion-51/)

- - looking for a hull only (https://www.offshoreonly.com/forums/general-boating-discussion/181652-looking-hull-only.html)

There's a nice looking Apache hull for sale in the classified section.

http://www.offshoreonlyclassifieds.c...o21812-en.html

Thanks guys for all of you that have or knew a hull for sale .

I,m waiting for a few quotes ,The Yanmar 440 ,s are waiting to have a home.

Quote:

Originally Posted by CLIMAX (Post 2477033)

I have a Hustler 40 project on a Myco

Climax ,I ve tried to get a hold on you ,could you give me a call at : 0031 297 287907 ?

I,m intrested in the Hustler

thanks A.J

We have a 2004 390 Velocity we are currently rebuilding whippled 496's for. Would sell the hull without power. has drives, and a trailer.

AJ I will send you some pictures tonight

ziet er leuk uit sterling

I sent you some information on a Fountain.
Let me know if you didn't get it.

Quote:

Originally Posted by CLIMAX (Post 2498493)

AJ I will send you some pictures tonight

Maybe something went wrong with sending the pics ,but I did not received any

still intrested in the Hustler

thx A.J

For all you guys that knew or had a hull for sale ,Thanks

I bought a Baja 40 outlaw ,the one in the classifieds that was a stripped recovery.
This seemed to be the ,,poker run edition '' and is built light lay up according the owner .

It is not the headroom I was looking for ,but ok ,price was fair ,it came with a 2006 triple axle alu trailer .

We have a marine upholstery company overhere ,so that was part of the decision we took ,to buy a stripped boat .

The idea was to spray the deck & sides in silver metellic ,and for upholstery silver and blue ,and blue assecoires.

I have bought Frequenty ,s Pulsedrive unit that I ,m going to use with the 2 x 440 Yanmar turbodiesels ,with a set 2 speed ZF gearboxes with 1,3:1 in 1 st and 1:1 in 2 th gear .

Anybody can do an estimated guess about speed ?

I was hoping for 65 mph with a set Merc 4 blade cleavers 17 x 20 or 17x22 pitch ( if they do exist)

Both Yanmars are going on a dyno within a few weeks ,and they are going to bump horsepower up to 480

I know this is not going to be a real fast boat ,but our gas price is 25 % more than diesel overhere ,thats why we opted for diesels .

I could however go for single speed ZF gearboxes with a smaller ratio so I can use more common pitch sizes ,but I like the idea of having 2 gears on a diesel.

So what do you guys think ?