Fender Racks

Reply Subscribe

Thread Tools

03-13-2008 | 09:17 PM

#41

DirtyMoney

Registered

Joined: May 2003

Posts: 3,025

Likes: 29

From: Murrayville, GA

Am I the only one that uses 10" bumpers?

03-13-2008 | 09:26 PM

#42

Griswald

Registered

Joined: May 2007

Posts: 1,272

Likes: 0

From: Georgetown, TX

Quote:

Originally Posted by C_Spray

Why not just use stainless steel?

I have a ton of that stuff laying around from my old drag car. It's cheap, light, and won't rust once coated. Also, something different.

03-13-2008 | 09:53 PM

#43

baywatch

Registered

Joined: Sep 2003

Posts: 1,867

Likes: 14

From: Here and There

Quote:

Originally Posted by rbr2328

Am I the only one that uses 10" bumpers?

I was about to ask the same thing. I use 10" at the front and 8.5" in the back.

Last edited by baywatch; 03-13-2008 at 09:55 PM.

03-13-2008 | 09:57 PM

#44

DirtyMoney

Registered

Joined: May 2003

Posts: 3,025

Likes: 29

From: Murrayville, GA

I have never found any for 10" so I have never bought them.

03-14-2008 | 12:27 PM

#45

jbrauer

Registered

Joined: Sep 2001

Posts: 567

Likes: 0

From: Nashville, TN

Quote:

Originally Posted by chuckd1025

How many interested at $150.00 a piece? ANY color choice. Depending on how many i'll have my fabricating department build the damn things that price is rediculous!

I'd be in for four singles or better yet two doubles in 8.5". Let me know and I'll pick the color!

Jeff

03-14-2008 | 07:57 PM

#46

haulinvols

www.Bajaboatowners.com

Joined: May 2005

Posts: 903

Likes: 0

From: Knoxville TN

Quote:

Originally Posted by fastscarab22

there was some shown that were made out of pvc , like the stuff used for a main line or drain tile with holes, cut to fit . Not the best but if its under the hatch who cares . They were in a baja thread

That was my boat. I could not justify the cost of the billet stuff, especially since nobody ever really sees it. They have served me well and held up extremely well.

Attached Thumbnails

03-14-2008 | 08:01 PM

#47

chuckd1025

Registered

Joined: Jul 2007

Posts: 201

Likes: 0

Quote:

That was my boat. I could not justify the cost of the billet stuff, especially since nobody ever really sees it. They have served me well and held up extremely well.

What type of material is that? Exactly how do you have that mounted? Is it open at the bottom or is it a closed bottom with a hole to let the water out.

Thanks Chuck D.

03-14-2008 | 08:15 PM

#48

27Fountain

Registered

Joined: Jan 2008

Posts: 361

Likes: 0

From: Jacksonville, FL

Did you make them out of pvc pipe. Or are they store bought. What store?

03-14-2008 | 09:28 PM

#49

haulinvols

www.Bajaboatowners.com

Joined: May 2005

Posts: 903

Likes: 0

From: Knoxville TN

I made them out of 10" PVC drain pipe. They are cut to 1.5 foot lengths and mounted using aluminum brackets that I fabbed up. They are open at the bottom and the fenders rest on the flat part of the bilge under them. They were a bit too heavy for my taste so I cut the 4" holes in them to lighten them.