Offshoreonly.com
Page 2 of 2
1
2
Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Boating Discussion (https://www.offshoreonly.com/forums/general-boating-discussion-51/)
-   -   Is My Prop To High? (https://www.offshoreonly.com/forums/general-boating-discussion/184321-my-prop-high.html)

CLIMAX 04-12-2008 01:28 PM
Surface Drive

UNSANE 04-12-2008 03:52 PM
Originally Posted by CLIMAX (Post 2522991)
Surface Drive
Yes, that is the Arneson 80987982452 drive :evilb:

Strip Poker 388 04-12-2008 05:08 PM
Originally Posted by itilldo (Post 2522484)
you going to get that prop labbed
Being its a cnc prop from B Blades theres no need,the rpm is a little low though,The straight 14 cylinder doesn't rev to high .Peek HP was at 1250rpm.They build a lot of TQ with the bore size at 4foot each


All times are GMT -5. The time now is 04:28 PM.
Page 2 of 2
1
2
Show 40 post(s) from this thread on one page


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.