its sticking out of the water before I put my beer in it, it does make a cool rooster tail though I think I nicked it, anybody have a large file




Length - 1,302 ft

Width - 207 ft

Wow . . that must be something to see in person. Where is it?

As I get older my prop gets lower and lower.

Taarbek

you need one of these five blades to get you up on plane

you just know that somebody's gonna say -"you'll need a Konrad with that kind of 5 blade" - Jeff

you better get a prop lock before it falls off



15,000 containers and a 207' beam! And look at the crew-size for a ship longer than a US aircraft carrier which has a complement of 5,000 men and officers.

CK out the speed coating



Think it's big enough? Notice that 207' beam means it was NOT designed for the Panama or Suez Canal . It is strictly transpacific. Check out the cruise speed: 31 knots means the goods arrive 4 days before the typical container ship (18-20 knots) on a China-to-California run. So this behemoth is hugely competitive carrying perishable goods.

This ship was built in three, or perhaps as many as five sections. The sections floated together and then were welded. The ship is named Emma Maersk. The command bridge is higher than a 10-story building and has 11 crane rigs that can operate simultaneously.


Country of origin - Denmar k

Length - 1,302 ft

Width - 207 ft

Net cargo - 123,200 tons

Engine - 14 in-line cylinders diesel engine (110,000 BHP) Cruise Speed - 31 knots, Cargo capacity - 15,000 TEU (1 TEU = 20 ft3 container)

Crew - 13 people First Trip - Sept. 08, 2006 Construction cost - US $145,000,000+

Silicone painting applied to the ship bottom reduces water resistance and saves 317,000 gallons of diesel per year

I ran one of those last year but in Stainless, I got a little happy with the boost with my Whipples and broke a prop shaft.We were in 10,000ft of water.I could see it on sonar sitting on the bottom Lucky I had it on my gold Visa card , they were not to happy when I told them if broke off,the 5 blade I was running was a custom 5 blade stainless billet one from B Blades, Brett hooked me up the second time around I pocketed $325.000 on the claim. Lucky we keep the old bronze 4 blade made like in your picture. it was a beoch replacing the shaft in the water, but it was a 2 pc shaft.


I still keep telling those little Jap guys I dont believe the silicon is helping shet


Hey does anybody know were I can get some fenders for the sides?

She big!

you going to get that prop labbed