outdrive showers =cavatation
#31
Registered
https://www.driveshowers.com/
Picking this thread back up, Im considering latham drive showers. I dont boat long distances (fairly small like for my Baja 35 Outlaw), and just researching all I can before deciding. Not even sure what I am asking in specifics, rather are folks for or against, hows the experience been, etc. I have twin 525efis, Bravo 1 Sportmasters. Thanks!
#32
VIP Member
VIP Member
get the simreks, best bang for the buck and are removable, no drilling.
The following 3 users liked this post by offshoredrillin:
#33
Platinum Member
Platinum Member
iTrader: (6)
If you go a head and buy them just be careful of the placement of the pickup in the cavi plate, Ive seen them cause aeration issues with the props
#34
Registered
Ya, thats what I've heard for some. Besides the template, one really doesnt get a second chance on the placement after drilling a hole. I know no drilling with some, but Id only go with Latham if I did it...
#35
Platinum Member
Platinum Member
iTrader: (6)
spinning in or out also comes into the equation for placement
The following users liked this post:
dykstra (08-24-2021)