Hey no problem at all, We are always looking for new recruits for the "Bad Influence" Crew , But we might be a little worse to deal with then where your at. We are also alot more fun.

Prop Work in the Region
 

Fellas, I am looking for someone to do some prop work. I am running 24's 4 blade at 5100rpm, I was looking to get 25 or 26, 4 or 5 blade labbed and see how that worked. Anyone know someone that can do the work on new props? Thanks

Try donzi.net you'll get all your q.'s answered a wealth of knowledge there, I think that boat came from the factory with labbed mirage plus 25's I think

I have some 23 quad 4's , blue printed 24 quad 4's and a set of 26 quad 4x's.

Do you have injected motors? and what size and whats the rev limiter set at ? what brand is the prop you have now?

I do, I have the 377 Scorpions. I am running 5100 right now with 24 4blade, running about the same with labbed 25p 3 blade. looking for more hole shot than the 3 blade, but trying to keep the speed of them. Have to get the makes in the next message

All the Scorp experts say the Mirage Plus is the way to go on that boat.

There are several of folks on the Donzi.net with them including one guy that dialed them in for Donzi

Hey Brian, I don't suppose you're using the RH 26 Quad IV X right now are you?

No boat in the water , so they are sitting on the shelf.

What's your e-mail Brian. I've lost it somehow! Your PM's are turned off too.