L ooking For Project Boat
 

Guys, Im looking for a good project hull 23-27ft with or without a motor or drive..Prefer boat with trailer and under $10,000

Thanks

Got an Infinity 265 with single 454 Mag and Bravo 1. Need painting, tune up but not much more, May be changing the seating arrangements to bolsters. Also a Formula 272 LS with twin merc. 350, Mags, Alphas. Need the tachs calibrated and ajusted or two new tachs. Both with trailers both around $11,000+- Not really project boats, unless you want make them one. :)

This one is just outside the US in Canada.
I think this one looks great for a project boat.
http://sarnia.kijiji.ca/c-cars-vehic...QAdIdZ54147389

He wants 5K for it

Street address: Lakeshore Rd, Camlachie, N0N 1E0 View map
Location: Sarnia
Date Listed: 29-May-08


Up for sale, I have a "NEW" 1987 30' power boat hull (never in the water), manufactured by Dynamic. Built to handle twin inboard engines. Bought as a building project, but didn't have the time to start on it. Please contact me with any questions. Randy (519)899-4962 Cell (519)383-2951


View larger image

View larger image

View larger image

View larger image

hmm...a "new" 1987 Hull ?????? wtf

Check this out in Fountain forum? Maybe manybe not??

http://www.offshoreonly.com/forums/s...d.php?t=190572

I have an 85 Formula 242 up for sale. It is turn key as far as running goes but needs some tlc. Engine cover needs work, vinyl needs replacing, stereo needs rewiring, steering wheel needs to be wrapped, needs a couple nicks and scrapes fixed....etc. Up side is a fresh 540 making 600hp and new Bravo 4 blade prop. Selling boat for what new motor, install and new prop cost. $11500 includes trailer.

have a 72 like this , no arch ,bare solid hull on a steel myco trailer , new 4 wheel kodiack ss brakes ,lines , timken bearings



http://www.yachtworld.com/core/listi...oat_id=1792675


also have set of hostar roll dollies to put her low on the ground..12k


[email protected]

I've got a 23 Nova that needs Power-(Drive/Gimbal/Engine)
Also needs Interior. If interested I have power for it also-
(260 with Alpha 1)

1987 Formula 272 SR-1 in Tampa, FL. Needs motors/transoms/drives.
http://tampa.craigslist.org/pnl/boa/758576696.html

uh...i've been in this boat and it is much nicer than what he is leading on....Mark from Merc did the motor...it has 10 hours or less...clean as a pin...this boat is turn key and fun as hell...just add water and enjoy the rest of the summer...

sold a project Formula 35-7 2 years ago. guy did not even touch it. called me today offering it for 8k with 2 trannys, transom plate and gimball, kkfer t-tab, pumps, so on and so on... let me know if interested although it is bigger than what you are asking...

Pics and prices please [email protected]

Thanks

Pics ? [email protected]
Thanks

what are you looking for??i have a 24 kevlar cat,8500$+ trailer +300hp V8 evinrude(needs work)

If he is not interested in this boat I am. Can you send me pictures?

[email protected]

28 Cigarette
 

I'm getting ready to list a 28 Cigarette less power and drives. Boat has new interior with 3-man stand up bolsters, new aluminum fairing, hynautic steering, and a tandem axle trailer. $7,800. E-mail me if you have interest. [email protected]. Thanks, Barry

Pix sent last night. Did you get them ??

I`m considering selling my Python 24' x 7'. It`s not a project, but could use a little vinyl replacement in cockpit. 502 / Bravo. I would need just a bit more than $10K as it is ready to go and on a tandem trailer. I might could swing a deal minus the 502 ... ?

I`m not too far from Kansas either -- 15 minutes south of the OK state line on I-44.

PM Sent

Here's a Pantera project for $10K.

http://www.offshoreonly.com/forums/s...d.php?t=191516

how about a late eighties stingray. with say a large small block and shortened alpha drive...um wait a minute. i think that one is taken all ready. my bad.:rolleyes:

Email me please [email protected]

Please email me [email protected]

Thanks

Sending email now.

i have an 87 scarab for sale. perfect mechanically and a pretty good lookin boat. could use some minor tlc. has a triple axle trailer. $15000.

Email me please... [email protected]

Email me a price without the 502 please

[email protected]

I was able to contact the owner and he is on vacation until monday. He will be able to send pix then. The boat is listed on boattrader.com. Heres the link with some low res pix. http://www.boattrader.com/listing/19...a-242-93104649
If this link is not working you can go to site and type 1987 Formula 242 into the search.
Scott told me that he mistakingly listed the boat as an '87 in the listing.

Anyone else have anything

Email me pics and info [email protected]

Ttt

$400 and its local.

61' redfish

http://www.fiberglassics.com/forms/f...edfish_001.jpg

http://www.fiberglassics.com/forms/f...edfish_003.jpg

http://www.fiberglassics.com/forms/f...edfish_005.jpg

Steve ...Thats pretty cool..Where is it..Craigslist ?

So did you pickup your new "project" ?

got it home yesterday. kchotboat and i are going to restore it together. might do a "green hornet" theme on it :cool:

http://www.donzi.net/forums/attachme...1&d=1217037357

Steve,
I've been looking for something like that for the kids to play with..... Send more info to me at [email protected]

Brad

just sent you an email. lots of pics. make take a while.

the redfish isnt advertised anywhere but i can get you info if your interested. floor needs to be cutout and refoamed and the bottom is wavy as hell probably from sitting in the water forever.

Let me know if you need rigging parts

wrong thread

16 foot hydrosteam with 200 black mac need carpit and seat 2,500.00 o.b.o [email protected]. i take trade as long that ido not have to feed it:party-smiley-004: