![]() |
Cover for KIEKHAEFER throttle controls
I have KIEKHAEFER throttle control for a single, but the paint on the base is chipping. Do they make powder coated covers for the base of the controls? I recall seeing, when Trick was around, covers for the base of the throttle controls...Any info is helpful. :ernaehrung004:
thanks |
Good luck, I'm still trying to find a set of anodes for my K-tabs. The smaller ones that mount vertically on the K-tab mount/transom.
|
Originally Posted by sleek1
(Post 2632782)
Good luck, I'm still trying to find a set of anodes for my K-tabs. The smaller ones that mount vertically on the K-tab mount/transom.
|
I don't think I've ever seen a cover specifically for the Kiekhaefer controls.
That being said, I know Livorsi offers them for their own throttles. I don't know if they will work over Kiekhaefer controls. http://www.livorsi.com/catalog/controls_accessories.htm You might consider a winter project of just pulling your original controls apart and having them PC'd or painted. There are a lot of parts to them once you pull them apart, but its not difficult to put back together if you take your time. |
Originally Posted by sleek1
(Post 2632782)
Good luck, I'm still trying to find a set of anodes for my K-tabs. The smaller ones that mount vertically on the K-tab mount/transom.
|
Thanks guys, I found it on BAM.
|
| All times are GMT -5. The time now is 12:07 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.