ar15meister

Anyone know where I might be able to get a 73873A power steering pulley and a power steering pump off from a 1991 454 Merc motor? I dont care if it is new used whatever. I found a couple of pumps on the net but I cant find the god damn pulley.

It would have to be in or around the Toronto area.

I sent mine in to get rebuilt and they destroyed it---likely ruining my day off tomorrow and my whole planned weekend of boating in Muskoka. We just pulled pumps and pulleys of a couple of our old cars with GM big blocks and none will fit. We cant even get the ****ing pulley off the pump they ****ed it up so badly.

I am so pissed.

Scott B

Have the pulley in the warehouse.. However, that pulley is for the seawater pump, not the PS..

Not sure on the PS pump,most likely have one.. BUT, I am in Miamuh...

plumbers crack

Its astandard saginaw pump,1986 chevy truck should work.They have a standard part number and metric pump,use the standard,any junk yard or auto parts store.

You can buy the pump and swap the housing (can) and install.

ar15meister

by can do you mean the resevoir?

What about the pulley? The pulley is my biggest problem.

I have pumps galore but I need the special pulley with the offset.

ar15meister

73873A power steering pulley

can anyone cross this number and give me a GM part number?

You would be saving my weekend!

Is there even a cross?

That is the mercruiser number

1bagger

I just checked the pulley on my 500hps # 81..... If it works you are welcome to use it for the rest of the season .
I'm not running the TG this year . Picked up a 41 Carver .
Friggen RV but my wife likes it .

Paul

ar15meister

thanks Paul but I dont think that one would work. Too bad about the top gun, I was looking forward to seeing you on the Lake this summer, we ran past Bronte on our way to barangas on Sunday. Wicked day.

If I could just get the darn cross reference number for the GM part I could try and grab one tomorrow morning and toss it in.

If I cant get the part number I am just going to go to a couple GM dealers and look but I am thinking my chances are slim.

Might have to chaulk this one up to god's will to stop me from scaring all of the doctors and lawyers on Lake Joe this weekend.......


If I anyone has this part number or knows where to get this thing I would owe you one.

ar15meister

I found the mercruiser pump number 16792A1

Pulley 73873A1

NEED THE GM CROSS REFERENCE NUMBERS !!!!!

ccflash22

Have you tried all the dealers around Toronto. There were several according to the Mercruiser website. You have probably already tried them but it might be worth a shot. It is a pricey little pulley.

MASOMAN

iTrader: (1)

I Have A Metric Pump With Pulley If Needed Call 814 397 1826. I Live In Erie Pa. About 2 Hours From Toronto