Needs Pics of Gen III Stainless Marine
08-21-2008 | 02:59 PM
#13
Thread Starter
Brotherhood #1
Joined: Sep 2006
Posts: 12,026
Likes: 111
From: Swansea Mass
Just had the motor redone into a 589 wth hopefully "bullet proof" parts and it will hold together i mean everything holds togther. I seriosly owned the boat for 2 years now and put 20 hours between 2 motors.
-Mike
-Mike
08-22-2008 | 05:00 AM
#17
Platinum Member
Joined: Jun 2004
Posts: 7,321
Likes: 1,039
From: frankenmuth michigan
I'm running gen 3's,they are big,ugly and take up ALOT of space BUT they have worked extremely well for 3 years so far on my boat . Make sure you get your holes for the tails cut correctly or you will have sealing problems. I had to cut the inlet air horn and blower inlet screen down to clear my m-3 procharger. My boat was so loud with the 5" stellings style tails that you could hear it for 5 miles at wot,there was no way around having mufflers,Smitty
08-22-2008 | 05:10 AM
#18
Platinum Member
Joined: Jun 2004
Posts: 7,321
Likes: 1,039
From: frankenmuth michigan
Last edited by articfriends; 08-22-2008 at 05:17 AM.
08-22-2008 | 10:56 AM
#20
JC Performance Engines
Joined: Jul 2002
Posts: 8,904
Likes: 34
From: Long Island, NY
SS, check out this thread... it should be of some help.
http://www.offshoreonly.com/forums/s...d.php?t=148046
http://www.offshoreonly.com/forums/s...d.php?t=148046
