Offshoreonly.com - Looking for billet camera housings

Page 1 of 3

Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Boating Discussion (https://www.offshoreonly.com/forums/general-boating-discussion-51/)

- - Looking for billet camera housings (https://www.offshoreonly.com/forums/general-boating-discussion/197540-looking-billet-camera-housings.html)

LubeJobs42

10-19-2008 10:28 PM

Looking for billet camera housings

Anyone know where you can get billet camera housings for the bullet style cctv cameras? I have seen some cool housings on some of the Nortechs. Not sure who makes them. Any info?

skater40

10-20-2008 11:59 AM

I sawsome at skater last week.You might call chris at 269-857-4308 and see if he can give you the info.

gerritm

10-20-2008 01:49 PM

They are not billet, but check out Ikelite camera housings. They are for diving and will be very tough, water proof, and easy to mount and operate with out opening. Just an idea.

puder

10-21-2008 10:59 AM

http://www.helmetcamera.com/

Mark	10-21-2008 01:00 PM

Here's a few sites for you. You may need to call for more specific info on hard-core housings, etc. Good Luck!

ezwatchstore.com
thespystore.com
camerasuperstore.com
supercircuits.com
camtechsurveillance.com
safetysaves.com
ati247.com
aventuratechnologies.com
surveillance-spy-cameras.com

It goes without saying, but ONLY use Sony cameras - Lenses AND Chip Board.

salesmanship

10-21-2008 01:19 PM

Or just buy a Nor-Tech!!!:p

Mark	10-21-2008 02:21 PM

Um, I'll gladly buy a Nor-Tech if Gino lends me the cash and pays for race fuel! :drink:

LubeJobs42

10-21-2008 03:24 PM

Quote:

Originally Posted by salesmanship (Post 2721597)

Or just buy a Nor-Tech!!!:p

If you had any kind of business sense, you woulkd send me one then you could tell everyone that the MTI guys have to call you for parts!!:evilb: Should i email you my address???:drink:

Keytime

10-21-2008 06:06 PM

Quote:

Originally Posted by puder (Post 2721477)

http://www.helmetcamera.com/

That's where I've gotten mine. No issues with 'em.

wrinkleface

10-21-2008 06:27 PM

Quote:

Originally Posted by LubeJobs42 (Post 2721675)

If you had any kind of business sense, you woulkd send me one then you could tell everyone that the MTI guys have to call you for parts!!:evilb: Should i email you my address???:drink:

TS, can't argue w/ that logic!!!!!:cool-smiley-027:

All times are GMT -5. The time now is 05:22 AM.

Page 1 of 3

Show 40 post(s) from this thread on one page