1200+ hp Skater 399 V
#181
Registered
VIP Member
Join Date: Jul 2003
Location: Mt Juliet, TN
Posts: 2,159
Likes: 0
Received 0 Likes
on
0 Posts
I have a pair of 925's that make well over 1,000hp of Eddies that run like raped apes. The drivability is like a pair of 500's. I would say 525's.....but they run cleaner.
#183
Registered
Join Date: Jan 2007
Location: LANCASTER, OHIO
Posts: 433
Likes: 0
Received 0 Likes
on
0 Posts
Eddie
Thanks, I have nothing invested in this thread but as a do-it-yourselfer enjoy learning from great builders like yourself. I know this project will be top shelf and one of the more memorable builds. GREAT JOB!!!!!!
Steve
Thanks, I have nothing invested in this thread but as a do-it-yourselfer enjoy learning from great builders like yourself. I know this project will be top shelf and one of the more memorable builds. GREAT JOB!!!!!!
Steve
#184
Last week I fired upthat 850 Eddie built for me. First lick of the ignition and it fired right up. It idled like a 500 EFI, only much louder!
#185
Registered
VIP Member
Join Date: Jul 2003
Location: Mt Juliet, TN
Posts: 2,159
Likes: 0
Received 0 Likes
on
0 Posts
I can testify to that...one lady hit the ground last year over here no chit. That was one of the funniest things I have ever seen!!
Last edited by thunderusone; 04-21-2009 at 04:44 PM.
#186
Registered
Join Date: Oct 2002
Location: New Orleans,La.
Posts: 983
Likes: 0
Received 0 Likes
on
0 Posts
Just read the whole thread(again)I've set up and raced sports cars(much easier that boats!) for almost 30 years,if that was the extent of your problems,you didn't really have any problems.Thanks for a great thread.You made a great boat even better. Bob
#187
Yours just run to smooth for big carb engines. I think that I will actually miss that small blower lope!
#189
Registered
Thread Starter
Thanks Bob. I agree, not much in the way of problems. I took the boat out today and everything is great. It ran excellent and I was able to get a good bit of the fine tuning done. One more trip tomorrow should about do it.
#190
Registered
Thread Starter