Boatring in S. FLorida Mon. and Tue. Dec. 15 and 16
12-16-2008 | 07:32 PM
#12
Registered
Joined: Aug 2003
Posts: 7,392
Likes: 1
From: Boca Raton
HIJACK ON
Rick, you don't really need the scan tool. All it does is cycle the ABS pump instead of you turning the key on and off. Some GM ABS units have their own bleed screws. They can be bled the traditional "pump-hold-release" method. Otherwise the ignition key can be cycled and eventually you'll refill the ABS unit.
Good luck...
HIJACK OFF
Rick, you don't really need the scan tool. All it does is cycle the ABS pump instead of you turning the key on and off. Some GM ABS units have their own bleed screws. They can be bled the traditional "pump-hold-release" method. Otherwise the ignition key can be cycled and eventually you'll refill the ABS unit.
Good luck...
HIJACK OFF
Is it also true not to pump, just hold to the floor??
Thread
Thread Starter
Forum
Replies
Last Post
Joe
General Boating Discussion
0
07-19-2006 09:55 AM
hugetime1
General Boating Discussion
11
12-09-2004 07:46 PM
