well built,heavy,comfy and slow as hell.

Dave B from STl are you the Dave that has the 40 Skater?

ssherman,

No I have a 32 Sunsation.

Dave

I believe the hull design of the 30' Cobalt Condurre was eventually sold to Cobalt by Carerra. It was based off of Carerra's 9M design. I have ridden in the 9M Carerra's several times back in the 1980's and they were very HEAVY boats, but could they ever take a hard pounding---I always felt safe in them. Great rough water boat!!!

i had the last 35 to get out of the factory..great boat for the money.. Very LIGHT ..would run mid 80's.. carb hp 500's..redid the boat paint., carpet.pop up cleats.. etc..

I do not know what most of youre problems are, fact is that back in the days it was the best deal fast good looking and cheap.
Yes Bob did allot of stupid things with the Germans wich are also friends of mine.
But i have an AEROTEK and i kick ass with it !!!
C-YA !!!!

I had this boat that was build by Aero tech, and challenger. I don't know if its the same aero tech or not. But it was a great, fast hull.

i just did an upgrade from my 22 sonic to a 30 aero-tek with twin hp 500 staggerd

so, there are still some fl aero-tek's around.


steve

Was that 35' hull an original design. Also I think their ads had every size in one foot increments available. Correct me if it was a different company.

SAME COMPANY !!!!!!!!

Mold was original a 32 excalibur stretched to 38 the blocked of in 1 foot sections on the transom !!
38,37,36,35,34,and so on ,,all the way down to 27 !!!

VERY FAST AND GOOD HULL ,,but the deck is just paper thin ,,other then that awsome !!!