Herring Props
#14
Registered
I actually store my boat at SC Performance Marine where Herring is located. They just put in 3 HUGE CNC machines that run nonstop making props. Scott said they are stocking up for the season so they have plenty of product on hand for quick turnaround. He also said they will be at most of the big events and poker runs this season.
#15
Gold Member
Gold Member
#16
10x
VIP Member
Now that's a loaded question. LMAO
Yea, I'd like to know too.
__________________
Fountain powerboats rule "The Preacher"
Chicago Powerboat Club Director
[email protected]
www.chicagopowerboat.com
Fountain powerboats rule "The Preacher"
Chicago Powerboat Club Director
[email protected]
www.chicagopowerboat.com
#17
Charter Member#1195
Join Date: Feb 2001
Location: Ladera Ranch, CA USA
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
Some Hering Stats from last week!
New M-35 DCB with twin Teague 1200’s on #6 drives ran in Havasu last week:
159 mph on Mercury 16.5 x 40 – 18 5-blades
162 mph on Hering 16.5 x 40 – 18 5-blades
Dave is working on a few other setup adjustments, and hopes to pull the 41’s into the upper 160mph range, possibly knocking at the 170mph mark.
36’ Skater (traditional deck) with Pfaff 1300’s running 169mph with 16.5 x 40 – 18 5-blades. Boat owner is changing his gear ratio, and smaller pulley’s, hoping to get in the mid-170mph range.
DCB F-32 with 700SCi’s w/ NXT’s is running:
135mph with Merc 16.5 x 38 – 18 5-blades
139.4mph with Hering 16.5 x 41 – 18 5-blades
Hering is going after the guy that wants unreal service, the best product and the guy who wants to be the FASTEST!
Hering - 1 Year Warranty, Right Prop Management "RPM" Program that allows an exchange on a new set if they were too small or too big!!!
Does Merc do that???? NO
159 mph on Mercury 16.5 x 40 – 18 5-blades
162 mph on Hering 16.5 x 40 – 18 5-blades
Dave is working on a few other setup adjustments, and hopes to pull the 41’s into the upper 160mph range, possibly knocking at the 170mph mark.
36’ Skater (traditional deck) with Pfaff 1300’s running 169mph with 16.5 x 40 – 18 5-blades. Boat owner is changing his gear ratio, and smaller pulley’s, hoping to get in the mid-170mph range.
DCB F-32 with 700SCi’s w/ NXT’s is running:
135mph with Merc 16.5 x 38 – 18 5-blades
139.4mph with Hering 16.5 x 41 – 18 5-blades
Hering is going after the guy that wants unreal service, the best product and the guy who wants to be the FASTEST!
Hering - 1 Year Warranty, Right Prop Management "RPM" Program that allows an exchange on a new set if they were too small or too big!!!
Does Merc do that???? NO