Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Boating Discussion (https://www.offshoreonly.com/forums/general-boating-discussion-51/)
-   -   Motor Damage During Shipping ?????? (https://www.offshoreonly.com/forums/general-boating-discussion/203546-motor-damage-during-shipping.html)

RunninHotRacing163.1 02-25-2009 08:45 AM

1 Attachment(s)

Originally Posted by daredevil (Post 2807896)
Thats crazy after u paid for it already,,,,now u have to do it again. I tell u bro ,,,grab him by the B.... and shake him ,,or call me,,i do it forya.:angry-smiley-038::mad:

Thats crazy after u paid for it already,,,,now u have to do it again
Hey is'nt that the way everything in boating is ???:grinser010:
from what i'm being told im dreaming up the problem , and Pinky is a LIAR :evilb: so who am i to say

signed the DREAMER :ernaehrung004:

DareDevil 02-25-2009 10:16 AM


Originally Posted by RunninHotRacing158 (Post 2808211)
Thats crazy after u paid for it already,,,,now u have to do it again
Hey is'nt that the way everything in boating is ???:grinser010:
from what i'm being told im dreaming up the problem , and Pinky is a LIAR :evilb: so who am i to say

signed the DREAMER :ernaehrung004:

PM me the adress who calls PINKY a liar,,,i take care of that.

I don't care about u LOL,,,,,,but calling Pinky a liar ,,thats to much. :angry-smiley-038:

PS.: he will be dreaming alright !!!!

40FlatDeck 02-25-2009 10:41 AM


Originally Posted by RunninHotRacing158 (Post 2808211)
Thats crazy after u paid for it already,,,,now u have to do it again
Hey is'nt that the way everything in boating is ???:grinser010:
from what i'm being told im dreaming up the problem , and Pinky is a LIAR :evilb: so who am i to say

signed the DREAMER :ernaehrung004:

Bill, Bill, Bill.............

I really wish you would have given Larry a couple days to take care of this before you plaster it on websites. There was a misunderstanding between some people in the shop about what was needed and what happpened in shipping.
Do you really think Larry was gonna tell you to get f**ked??
You will no doubt get the parts you need to fix it.......Larry and his employees are some of the best in the business and have worked for years to get were they are today. It sucks to see some of the people on here jumping to conclusions.

They worked very hard on your motors Bill. Alot of issues were fixed and they rolled out of there making over 300 more horsepower a piece than when they came in.

I really hope you don't have anybody else "leak them down" or take them apart as some of your posts suggest. Take his advice, leave them were they are, and you will have a very, very, good running Skater.

I felt the need to come post for them since they do not get on the internet. Larry builds POWER and I will put his motors against ANY engine builders out there and he will stand by the work he does. If anybody thinks otherwise I have a Skater waitng for you...... HE WILL TAKE CARE OF YOU BILL.

I think you are a good guy bro, I just wish you would have handled this a little different......

Erik

Zoomnfun 02-25-2009 10:58 AM

How long should he have to wait, the proof was right here 1st thing Monday I believe.

40FlatDeck 02-25-2009 11:08 AM


Originally Posted by Zoomnfun (Post 2808293)
How long should he have to wait, the proof was right here 1st thing Monday I believe.

The parts were already shipped....

Listen, I understand he is upset, but at least give it couple days.

skater40 02-25-2009 12:33 PM


Originally Posted by 40FlatDeck (Post 2808289)
Bill, Bill, Bill.............

I really wish you would have given Larry a couple days to take care of this before you plaster it on websites. There was a misunderstanding between some people in the shop about what was needed and what happpened in shipping.
Do you really think Larry was gonna tell you to get f**ked??
You will no doubt get the parts you need to fix it.......Larry and his employees are some of the best in the business and have worked for years to get were they are today. It sucks to see some of the people on here jumping to conclusions.

They worked very hard on your motors Bill. Alot of issues were fixed and they rolled out of there making over 300 more horsepower a piece than when they came in.

I really hope you don't have anybody else "leak them down" or take them apart as some of your posts suggest. Take his advice, leave them were they are, and you will have a very, very, good running Skater.

I felt the need to come post for them since they do not get on the internet. Larry builds POWER and I will put his motors against ANY engine builders out there and he will stand by the work he does. If anybody thinks otherwise I have a Skater waitng for you...... HE WILL TAKE CARE OF YOU BILL.

I think you are a good guy bro, I just wish you would have handled this a little different......

Erik

I agreewith every thing eric said.I think you shot yourself in the foot with this childless tactic.

BraceYourself 02-25-2009 12:39 PM

I agree with Bill.

He had a problem and it wasn't resolved. Problem should of never occured in the first place.

To spend big money and have that problem arrive I would of done the same thing...

40FlatDeck 02-25-2009 01:02 PM


Originally Posted by BraceYourself (Post 2808374)
I agree with Bill.

He had a problem and it wasn't resolved. Problem should of never occured in the first place.

To spend big money and have that problem arrive I would of done the same thing...

How do you know it wasn't resolved????

A mistake was made when they were packaged up and it will be made right.

RunninHotRacing163.1 02-25-2009 01:21 PM


Originally Posted by 40FlatDeck (Post 2808289)
Bill, Bill, Bill.............

I really wish you would have given Larry a couple days to take care of this before you plaster it on websites. There was a misunderstanding between some people in the shop about what was needed and what happpened in shipping.
Do you really think Larry was gonna tell you to get f**ked??
You will no doubt get the parts you need to fix it.......Larry and his employees are some of the best in the business and have worked for years to get were they are today. It sucks to see some of the people on here jumping to conclusions.

They worked very hard on your motors Bill. Alot of issues were fixed and they rolled out of there making over 300 more horsepower a piece than when they came in.

I really hope you don't have anybody else "leak them down" or take them apart as some of your posts suggest. Take his advice, leave them were they are, and you will have a very, very, good running Skater.

I felt the need to come post for them since they do not get on the internet. Larry builds POWER and I will put his motors against ANY engine builders out there and he will stand by the work he does. If anybody thinks otherwise I have a Skater waitng for you...... HE WILL TAKE CARE OF YOU BILL.

I think you are a good guy bro, I just wish you would have handled this a little different......

Erik

ROCK ON ERIK my Brutha !!!!!!!!!!!!!!!!!!!!!!!!!!!! I agree Larry is a very hard worker just like you told me when you recommended LARRYS ENGINE & MARINE in Tuscon , we are all responsable for our employees BIG Daddy ... thanks again and see ya at the STORM :ernaehrung004::ernaehrung004:
signed the DREAMER

RunninHotRacing163.1 02-25-2009 01:32 PM

[QUOTE=skater40;2808371]I agreewith every thing eric said.I think you shot yourself in the foot with this childless tactic.[/QUOTE



No CHILDLESS TACTIC at all Skater40....... He WAS called & e-mailed AND given time to respond...24 HRS.+ with NO RESPONSE until Friday evening after the thread was started.
No one shot themself in the foot, everyone is entitled to their own opinion....just stated our opinion & wanted to know what other people's opinions were & what they have gone through.
PINKY :cheer::cheer:
P.S. Bill had the speaker phone on when I was called a Liar...good customer service/public relations huh??????


All times are GMT -5. The time now is 12:48 PM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.