Offshoreonly.com - Anyone bought alignment tool from this guy?

Page 3 of 4

Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Boating Discussion (https://www.offshoreonly.com/forums/general-boating-discussion-51/)

- - Anyone bought alignment tool from this guy? (https://www.offshoreonly.com/forums/general-boating-discussion/205856-anyone-bought-alignment-tool-guy.html)

littledcsrodshop

04-03-2009 08:25 AM

--- WHOYA ----

I think we talked about this before but I have slept a bit since then , so please forgive me.. Do you make one that will work with an ITS transom assy. ??

littledcsrodshop

04-03-2009 08:32 AM

Quote:

Originally Posted by c_deezy (Post 2832527)

Looks like a solid piece, going to order one from him soon. On another note, anybody got a line on a transom cutout jig?

I have a Merc. jig. Drop me an email & I can probably help you out..

littledcsrodshop(at)comcast(dot)net

DareDevil

04-03-2009 08:50 AM

1 Attachment(s)

Picture

littledcsrodshop

04-03-2009 08:59 AM

Quote:

Originally Posted by daredevil (Post 2835255)

Picture

Is yours long enuff to work with an ITS ??

whoya

04-03-2009 09:19 AM

Quote:

Originally Posted by littledcsrodshop (Post 2835231)

--- WHOYA ----

I think we talked about this before but I have slept a bit since then , so please forgive me.. Do you make one that will work with an ITS transom assy. ??

Sorry-No

whoya

04-03-2009 09:21 AM

Quote:

Originally Posted by littledcsrodshop (Post 2835231)

--- WHOYA ----

I think we talked about this before but I have slept a bit since then , so please forgive me.. Do you make one that will work with an ITS transom assy. ??

I was thinking of making them, Just not sure what kind of demand there would be for them.

whoya

04-03-2009 09:26 AM

Quote:

Originally Posted by daredevil (Post 2835093)

Does it come with the round gimbal piece ???

I got mine from speed & custom and it is actually the original merc tool with a round plate that is good for SSM ,TRS and bravo or Alpha and paid 80 bucks for it ,,,don't think thats bad either.

If this one here does not have the plate it is almost worthless !!!

On e-bay it is not showing the plate ?!

Just curius .

You only need the plate for TR and TRS.
Your tool can do about all of the drives. Where my tool does not do the TR and TRS.

littledcsrodshop

04-03-2009 09:28 AM

Quote:

Originally Posted by whoya (Post 2835283)

I was thinking of making them, Just not sure what kind of demand there would be for them.

Well I know you could sell atleast one.. :D

whoya

04-03-2009 09:30 AM

Quote:

Originally Posted by F1-00 Racing (Post 2835114)

if I am not mistaken it does not come with the round gimbal piece you are talking about, it is on another auction by the same guy for like 20 something dollars said it would only add 4 to the shipping if you got both

He talking abouta aluminum plate for the TR and TRS drives where it is required.
The other part that goes onto my Alignment tool was the Gimbal bearing driver or Seal driver.

DareDevil

04-03-2009 10:56 AM

Gotcha,,,if you would tap the end and make an extension for your tool ,,it would work for the ITS or extension box setup !!!

Also the SSM and TR/S part could be screwed on and it would work in those plug ins also, since the plug in of the TRS ,Konrad,SSM is bigger then the Bravo and Alpha'a !

Just a thought !!!

Ps. i could send u that gimbal ring plate and u could make it and then send it back to me ?!:ernaehrung004:

All times are GMT -5. The time now is 01:02 PM.

Page 3 of 4

Show 40 post(s) from this thread on one page