Anyone bought alignment tool from this guy?
04-03-2009 | 08:25 AM
#21
Registered
Joined: Apr 2005
Posts: 2,197
Likes: 3
From: TN
--- WHOYA ----
I think we talked about this before but I have slept a bit since then , so please forgive me.. Do you make one that will work with an ITS transom assy. ??
I think we talked about this before but I have slept a bit since then , so please forgive me.. Do you make one that will work with an ITS transom assy. ??
Last edited by littledcsrodshop; 04-03-2009 at 08:28 AM.
04-03-2009 | 08:32 AM
#22
Registered
Joined: Apr 2005
Posts: 2,197
Likes: 3
From: TN
04-03-2009 | 09:19 AM
#25
Registered
Joined: Mar 2004
Posts: 1,032
Likes: 1
From: Vermilion, OH
04-03-2009 | 09:21 AM
#26
Registered
Joined: Mar 2004
Posts: 1,032
Likes: 1
From: Vermilion, OH
04-03-2009 | 09:26 AM
#27
Registered
Joined: Mar 2004
Posts: 1,032
Likes: 1
From: Vermilion, OH
Does it come with the round gimbal piece ???
I got mine from speed & custom and it is actually the original merc tool with a round plate that is good for SSM ,TRS and bravo or Alpha and paid 80 bucks for it ,,,don't think thats bad either.
If this one here does not have the plate it is almost worthless !!!
On e-bay it is not showing the plate ?!
Just curius .
I got mine from speed & custom and it is actually the original merc tool with a round plate that is good for SSM ,TRS and bravo or Alpha and paid 80 bucks for it ,,,don't think thats bad either.
If this one here does not have the plate it is almost worthless !!!
On e-bay it is not showing the plate ?!
Just curius .
Your tool can do about all of the drives. Where my tool does not do the TR and TRS.
04-03-2009 | 09:30 AM
#29
Registered
Joined: Mar 2004
Posts: 1,032
Likes: 1
From: Vermilion, OH
The other part that goes onto my Alignment tool was the Gimbal bearing driver or Seal driver.
04-03-2009 | 10:56 AM
#30
Banned
Joined: Oct 2006
Posts: 5,844
Likes: 0
From: Bradenton Florida
Gotcha,,,if you would tap the end and make an extension for your tool ,,it would work for the ITS or extension box setup !!!
Also the SSM and TR/S part could be screwed on and it would work in those plug ins also, since the plug in of the TRS ,Konrad,SSM is bigger then the Bravo and Alpha'a !
Just a thought !!!
Ps. i could send u that gimbal ring plate and u could make it and then send it back to me ?!
Also the SSM and TR/S part could be screwed on and it would work in those plug ins also, since the plug in of the TRS ,Konrad,SSM is bigger then the Bravo and Alpha'a !
Just a thought !!!
Ps. i could send u that gimbal ring plate and u could make it and then send it back to me ?!
