![]() |
If the little rubber hose didn't pop off as Phantom Chaos advised then I would do as Griff suggested. I had the same issue last year and corrected it by pulling the drive and using a long thin drill bit to clear debris from the lower unit speedo pickup and it's vertical capilary where the rubber hose connects... problem solved!
Originally Posted by Griff
(Post 2838152)
The speedo pick up on the leading edge of the lower unit is probably plugged. Its a little notch about 4" above the bullet. The actual pick up tube could be connected to either drive.
|
| All times are GMT -5. The time now is 08:30 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.