Looking for a pair of Blowers
 

I am looking for a pair of 1471's super chargers. I have been checking the classifieds and I have seen anything listed on there lately. Any body got a set around with or without carbs. I have the chillers already. I am putting them on a pair of 572's. They have 871's now but looking for more!!

Thanks in advance

go with a screw charger, like whipple, more efficient, quicker response than a roots blower.

I am trying to work a deal on a boat with PSI's that I want to tune down. I may be looking for a trade to 871's because the PSI's are so tall. Let me know if you may be interested. I probably wont have the deal done for at least a few weeks.

PSI ?? What do you have??

B206 blowers on tall deck intakes. May sell with carbs depending upon what my needs will be when tuned down. I dont have them yet though. You know PSI's are the chit!:cool:

LMAO.. I don't know what PSI's are!! LMAO.. I got an engine builder that probably does.. I am the guy with the cash!! I know what Procharger's are. I know what 1471's are. I know what whipples are. and I know what the R-Techs are. So if its one of them.. We are good. I just want to take my 800hp 572's to 1000' hp You know.. just a little more giddee up and go!!:evilb:

You really dont know what PSI's are? Heres a pic. Not mine...but someone elses gorgeous boat!

BLAH BLAH BLAH :evilb:

LMAO.... You crack me up!!

Oh I have seen them but never up close. All my friends use Blowers, Prochargers, Whipples!! Nice looking units though..

Curious
 

Hey RunningHot,
Did you ever boat in or around the Grand Haven MI area from time to time. I use to run into a guy near this way years ago. The boat I'm thinking of must have been about a 32ft V-bottom simular to aerotech with drive ext's. Color was hot pink or something. It's been about 15 years now.

Just curious.

John

John did it look like this ??????:eek: grand haven, mich city noise tickets every weekend OH YEAH

get ahold of James on the board here ....
2 14 / 71 blower shop blowers

--------------------------------------------------------------------------------

2 complete clear anodized, billet case's 14 71's with adapter plates all 4 1550 BO laws carbs ($1250 apiece) KE flame arresters fuel logs and lines.. idler pulley , tensioner and throttle linkages....LESS THAN 30 HOURS... EVERYTHING you need from above the intercooler!!! $9500 OBO
[email protected]
Attached Thumbnails

We have 14:71's new and used. We also have some PSI's here. Give Randy or Albert a call at 305-893-5018.

PSI's are the chit. Almost every gas engine that makes some nasty HP has them.

You can make 1000 with these. Sell off the rest of the stuff or build you an extra set of engines.

http://www.offshoreonly.com/forums/s...-complete.html

They will polish back out, they turn really nice. Look real nice inside the case.

NOW YOUR TALKIN I will email him now

Thanks so much!!

Mario

Ya that's a good price. I just sold a perfect set for $9k so they're in the ballpark if low hour.

I sent him an email.

Thanks

Let me know if you need James tele # BIG Daddy :ernaehrung004:

oh now your screwed ... you gave James your email address?!

You can now expect to recieve nudity, prejudice and right-wing politics in your inbox every morning. :grinser010:

:eek::eek: OMG... All that and a set of blowers... WHAT A DEAL!!!
Bill, Running hot racing, YOUR ARE THE MAN!! LMAO

I will wait a day for him to call, Then I'll get it from you if I don't hear from him If you get a chance Call him and tell him to check his Email. All my numbers are on it

Thanks Bill

Mario

Whats the word on your stuff. I got to move fast so let me know your plans

Mario

That ad is on SOS. Been there for a while, but I talked to him not to long ago, and he still had them.

:eek:

SOS??? Another one of those boat sites??

Did you buy the Blowers from James so you can order out your ICE INJECTION SYSTEMS ??

Nah... I haven't heard from him. I sent two emails to him. I haven't heard from him...

Get on him. The money is burning a hole in my pocket... Your right I can't order that ICE Injection of I don't have the right power in the boat!!! LMAO... I sent another email today.. Call him for me.. or PM me his number so I can call him.. I am taking the boat for a ride tomorrow with the 871's on it then De-Rigging Monday AM.. I will need them next week.. COME ONE BIG DADDY!! Lets get this rolling... Its getting warm here..

Thanks for your help

Mario

Dont matter on the Hp for the Meth kit ,Rudy will dial that in with the right nozzles ...I will call James now and see whats the Dilio:ernaehrung004:

Just got off the phone with James and he has them ,give him a call his # is in your P.M.box:cool-smiley-027:

Just order new ones. You have all the parts, you just need bigger blowers and carbs.

I bet right now someone would love to sell you an entire set up.

Why the Phuch would Mario have to buy new ones when theres a complete set-up dyno time only from blower to carb for peanuts ....:Whatever:

You sure are in a crappy mood this morning.

Go stick your head in the toilet and take a deep breath:evilb:

Talk to him.. Thanks I am going to call him back around 5pm. He has two sets.. One with 20 hours and one set with Dyno Time only... He will let me know what set I am taking off his hands. He has a buddy that is interested in one set.. He is not sure what set but will know by days end...

THANKS.. REMIND ME TO BUY YOU A DRINK WHEN I SEE YOU AT A POKER RUN!!

James & Bill P are great guys ,good luck :ernaehrung004:

so you want me to shine Sh*t for 15k. but on another thread you are looking for a DEAL.. Dollar for Dollar.... LMAO

Nice.. I will give you 1000 a piece.. I am looking for a good mooring for each sponson!! They will do for the right price.. :eek:

Talked to him today.. GREAT Guy!! I will follow up with him in the AM.. Going for a RIDE tomorrow.. :evilb::evilb: Then Monday we DE RIG!!!!!

You know what. Fu(k you for saying that. That was a Di(k move on your part. Why don't you go enjoy some more happy hour with your very UN - originally named boat.

Next time recognize when a guy is tryng to help you out instead of being That Guy. I was refering to brand new chit because I know a guy that could have taken your old stuff off your hands.

I guess there is no need in trying to help you high rollers out, is it?

Now see.. You had to get mad.. I was just Busting your stones!! Relax... You use more muscles to frown then to smile.... So if your frowning... Your wasting energy... LMAO... Smile.. Its all good... AND TRUST ME... I AM NOT A HIGH ROLLER!! :ernaehrung004: