Jim Darr might have a set....

How about a pair of 5 Blade Hering 16 1/2 x 32 Pitch ?
I am unsure of Rake's.These were run on a 40' Skater SuperCat.
More #6's available also,but they are less pitch..
Make an offer to [email protected].

More #6's-
http://www.offshoreonly.com/classifi...o29122-en.html

http://www.performanceboats.com/html...y-038::bsflag:

Why does this Jim Darr keep popping up?

I have a set of Herring 16.8" X 33 pitch, 20*. These are a really strong 33, 4% slip on my MTI. However the rake will give ALOT more bow lift. Maybe more that you want.

The higher the degree rake the more bow lift?

Ex. Gino had a set of 10 degree rake which I beleave the blades
lay flatter. This would give less bow lift then a 20 degree?

20 Degrees of rake, is a whole lot of rake! How did they perform on your MTI?

Julie

Ginos props are even less rake than the Turbine guys are running. I was really surprised when he said they were only 10 degrees of rake.

Julie

thats why I did'nt buy them, I have a couple sets

Virtually new, test time only, no nicks.
Merc CNC 16.5 x 37 x18* R&L, 1200 HP blade.
Due