Need help ASAP
#1
Registered
Thread Starter
Need help ASAP
Hey everyone, I need to ask for some help. I put the boat in the water yesterday, started it, ran it at 1200rpm to warm up, parked the truck and as I was coming back the the boat I heard it losing rpm and stall out. I started it back up, it ran for a few seconds and stalled again, did this a couple more times and now nothing. It just cranks and cranks, doesn't sound like it even wants to catch. The motor came from a 1998 boat, so maybe a 1997 motor? It's a 454/330. It's getting gas, you can see it squirting in the carb, the coil is arching when I take the cap off of it, rotor is new, cap is new, I cleaned the ignition sensor, and pulled one plug wire to see if there was spark, and yes, there is spark. I checked the breakers on the motor, push them and they don't move, and also checked the fuse panel, all good. I'm at a loss!! I have an event coming up next weekend so I need this thing fixed by then. I hate to bring it to a shop, in fear that they won't get to it in time. Anyone have any ideas or live in the Syracuse, NY area??? Thanks!
Jay
Jay
#2
Registered
Platinum Member
Join Date: Sep 2004
Location: Delray Beach, Fl.
Posts: 200
Likes: 0
Received 0 Likes
on
0 Posts
Hi, call my buddy Bucky...mechanic/rigger at MRD...516.398.8485....tell him marc from Florida said to call ya!!!At the very least he can trouble shoot/suggest things to check...
Marc
Marc
#3
Registered
had a similar issue one time in an old boat, fuel in tank was contaminated,
see if you can get a fuel line off and pump some fuel into a glass container to get a look at it.
could also dump contents of spin on fuel separator into glass jar.
fuel and water will separate in the jar. mine was 50/50
got the tank pumped out and cleaned at a gas tank shop
see if you can get a fuel line off and pump some fuel into a glass container to get a look at it.
could also dump contents of spin on fuel separator into glass jar.
fuel and water will separate in the jar. mine was 50/50
got the tank pumped out and cleaned at a gas tank shop
#4
Registered
Thread Starter
had a similar issue one time in an old boat, fuel in tank was contaminated,
see if you can get a fuel line off and pump some fuel into a glass container to get a look at it.
could also dump contents of spin on fuel separator into glass jar.
fuel and water will separate in the jar. mine was 50/50
got the tank pumped out and cleaned at a gas tank shop
see if you can get a fuel line off and pump some fuel into a glass container to get a look at it.
could also dump contents of spin on fuel separator into glass jar.
fuel and water will separate in the jar. mine was 50/50
got the tank pumped out and cleaned at a gas tank shop
That's FIRST on my list for tomorrow!!
#8
Registered
Join Date: Apr 2009
Location: Sachse, Tx
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
The water separating fuel filters are so good nowdays that they won't let any water past to the engine -- check the fuel filter, if no water, then that is not the issue.
Are you burning Ethanol-based fuel ? If so, I bet vapor lock.
Are you burning Ethanol-based fuel ? If so, I bet vapor lock.
#9
Registered
Join Date: Jan 2007
Posts: 1,667
Likes: 0
Received 0 Likes
on
0 Posts
If there's enough water in the fuel tank to fill the separator then you're still skrewed. The rest goes right into the engine.
#10
Squirt it with ether and see if it fires off. I'm betin your not geting fuel. I've had enough fuel in the bowls for the accelerator pump to work (see fuel squirting) but the jets won't pick up.
A 97 motor with a carb. You probably have an electric fuel pump feeding the carb?
A 97 motor with a carb. You probably have an electric fuel pump feeding the carb?