New 650 EFI from Young Performance
#22
Banned
Joined: Sep 2007
Posts: 12,849
Likes: 3
From: Frankfort,ill
#23
Thread Starter
Registered
Joined: Jan 2004
Posts: 4,480
Likes: 43
From: Tennessee
Thanks Bill. I see that yours is up and running. Glad to hear it. Good luck with it. I will get a few more pics up when I get the flame arrestor on it. It has the best polish job I have ever seen.
Eddie
Eddie
#24
Thread Starter
Registered
Joined: Jan 2004
Posts: 4,480
Likes: 43
From: Tennessee
The engine is going in a Velocity 260. I have done quite a bit of rigging on the boat to get it ready for the engine. Here are a few pics of before, during and after. I had to fill 94 holes in the engine compartment for stuff that has been moved or eliminated. Enjoy
Eddie
Eddie
#27
Thread Starter
Registered
Joined: Jan 2004
Posts: 4,480
Likes: 43
From: Tennessee
Thanks, Doug. After talking to Steve Stepp (owner of Velocity) we think the boat should be right near 100 mph with the right setup. I need to play with props to see what it wants. It's going in the water for the first time today.
Have fun Bill. Talk to you soon.
Eddie
Have fun Bill. Talk to you soon.
Eddie
#28
Registered
Joined: Jul 2008
Posts: 2,801
Likes: 1
Beautifull attention to detail, and setup, should be a good seller thanks for documenting it for us.
Velocities are always fast in their sizes. That rig will sing with your new engine.
Please- keep us in the loop with the picts.
Uncle Dave



