Great first day back on the H2O
09-18-2009 | 09:51 AM
#81
Beak botr
Joined: Dec 2003
Posts: 891
Likes: 0
From: Cape Coral
I just want to point out something......
In your video you are cruising in the 4000-4300 rpm range.
Did anybody catch the boost? This guy did. One motor was at 8 pounds and the other was at 10 pounds of boost.
This is the same rpm range you said you were at when you smoked both motors. As the video shows, your motors are pretty loaded at that rpm range, we can see by your boost levels. 10psi and pump gas can detonate for sure.
In your video you are cruising in the 4000-4300 rpm range.
Did anybody catch the boost? This guy did. One motor was at 8 pounds and the other was at 10 pounds of boost.
This is the same rpm range you said you were at when you smoked both motors. As the video shows, your motors are pretty loaded at that rpm range, we can see by your boost levels. 10psi and pump gas can detonate for sure.
I had a simple question and RHR answered me personally outside this thread with an excellent response that makes perfect sense. I was NOT peeing on wheels,,RHR is one of my hero's.
Keep 'em .........Rocken On!!
09-19-2009 | 09:00 AM
#82
Thread Starter
Banned
Joined: Sep 2007
Posts: 12,849
Likes: 3
From: Frankfort,ill
My Post was not a slam and I do NOT want it used that way!!!!!
I had a simple question and RHR answered me personally outside this thread with an excellent response that makes perfect sense. I was NOT peeing on wheels,,RHR is one of my hero's.
Keep 'em .........Rocken On!!
I had a simple question and RHR answered me personally outside this thread with an excellent response that makes perfect sense. I was NOT peeing on wheels,,RHR is one of my hero's.
Keep 'em .........Rocken On!!
Artimus was not refering to you Bro just his longtime friend & good buddy Erik 
have a great weekend & Party On !!!!!!!!
09-19-2009 | 09:02 PM
#83
Registered
Joined: Dec 2000
Posts: 6,283
Likes: 1
From: EASTON MA.
, not sure whats up for tomorrow are you going out? I met up with a oso bro today and hope I can make a trade and cash for some TRACTOR HEADERS
5''ID OD 6'' That should let my blown 572 EXHALE just fine
I took measurements to see if I you have stellings put tails that curve 28% then go then go straight for 20''. that way I could rebuild another motor cover thats raised about 8'' like old school cig top guns with another pro stock scoop on top. so the exhaust will still be going over the back and could add mufs if needed otherwise its a ear protection issue for others not me. I love it loud ever stand between turbines leaving the dock holding dock lines with no ear protection Thats LOUD!! haha well going to bed just in case Gerry calls about a run later.
09-21-2009 | 07:56 AM
#84
Thread Starter
Banned
Joined: Sep 2007
Posts: 12,849
Likes: 3
From: Frankfort,ill
wow Big Daddy you got that right, not sure whats up for tomorrow are you going out? I met up with a oso bro today and hope I can make a trade and cash for some TRACTOR HEADERS 5''ID OD 6'' That should let my blown 572 EXHALE just fine I took measurements to see if I you have stellings put tails that curve 28% then go then go straight for 20''. that way I could rebuild another motor cover thats raised about 8'' like old school cig top guns with another pro stock scoop on top. so the exhaust will still be going over the back and could add mufs if needed otherwise its a ear protection issue for others not me. I love it loud ever stand between turbines leaving the dock holding dock lines with no ear protection Thats LOUD!! haha well going to bed just in case Gerry calls about a run later.
, not sure whats up for tomorrow are you going out? I met up with a oso bro today and hope I can make a trade and cash for some TRACTOR HEADERS 5''ID OD 6'' That should let my blown 572 EXHALE just fine I took measurements to see if I you have stellings put tails that curve 28% then go then go straight for 20''. that way I could rebuild another motor cover thats raised about 8'' like old school cig top guns with another pro stock scoop on top. so the exhaust will still be going over the back and could add mufs if needed otherwise its a ear protection issue for others not me. I love it loud ever stand between turbines leaving the dock holding dock lines with no ear protection Thats LOUD!! haha well going to bed just in case Gerry calls about a run later.
That should let my blown 572 EXHALE just fine Now that sounds way cool BIG Daddy ,and you know me im all about the LOUD !!!!!!!!!!!!!!!!!!!!!!!!!!!!!
09-21-2009 | 06:54 PM
#85
Registered
Joined: Feb 2003
Posts: 1,517
Likes: 0
From: bluffton sc
Hey wildman,how many hours you got on them motors now?????????????????????????????????????
We need some video's on engine assembly
(new thread how to build motors that last past 5 hrs could be a best seller.
go ahead laugh.... you just never know
We need some video's on engine assembly
(new thread how to build motors that last past 5 hrs could be a best seller.
go ahead laugh.... you just never know
09-22-2009 | 07:43 AM
#86
Thread Starter
Banned
Joined: Sep 2007
Posts: 12,849
Likes: 3
From: Frankfort,ill
Oh Yeah BIG Daddy
another 6.9 hours on the hour meters this weekend and Pinky is diggin it BIG TIME eek: lil B Rad just finished this VID before skool http://www.youtube.com/watch?v=Z3xg8Zm8ZMg
Will there be ROYALTIES in this best seller you speak of grand PuBah ???
http://www.youtube.com/watch?v=Z3xg8Zm8ZMganother few weekends and just may be time to pull them and send them out to sunny Ariz for a REFRESH
Last edited by RunninHotRacing163.1; 09-22-2009 at 07:47 AM. Reason: http://www.youtube.com/watch?v=Z3xg8Zm8ZMg
09-22-2009 | 08:57 AM
#88
Registered
Joined: Sep 2008
Posts: 967
Likes: 1
From: Newark, DE
09-22-2009 | 09:55 AM
#89
Thread Starter
Banned
Joined: Sep 2007
Posts: 12,849
Likes: 3
From: Frankfort,ill
hoping to still get her tweaked,tuned,dialed in before ole man winter gets here our weather just turned to chit yesterday and 7 dayz of rain another set of props should be here on friday and will wind her up again . May bring it up to Dereberrys place for December & January Pinkys been talkin to Leon & Family time to raise the roof in Texas WOOP WOOP WOOP Party On !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Last edited by RunninHotRacing163.1; 09-22-2009 at 09:56 AM. Reason: spelign
09-22-2009 | 10:21 AM
#90
Registered
Joined: Jun 2006
Posts: 14,914
Likes: 1
From: Lake Conroe, TX.
Thanks BIG Daddy u have an open invitation and i still have your BP Amaco credit card so its all good hoping to still get her tweaked,tuned,dialed in before ole man winter gets here our weather just turned to chit yesterday and 7 dayz of rain another set of props should be here on friday and will wind her up again . May bring it up to Dereberrys place for December & January Pinkys been talkin to Leon & Family time to raise the roof in Texas WOOP WOOP WOOP
Party On !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
hoping to still get her tweaked,tuned,dialed in before ole man winter gets here our weather just turned to chit yesterday and 7 dayz of rain another set of props should be here on friday and will wind her up again . May bring it up to Dereberrys place for December & January Pinkys been talkin to Leon & Family time to raise the roof in Texas WOOP WOOP WOOP Party On !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Just kidding. Might have to take ou up on that invite while I am vacationing. Spent first half of last week at a casino, second half of the week on a 3 day hunting trip, Got home sunday, rode in my neighbors new (to him) 36 skater, partied sunday night. Ran errands yesterday. Little business this morning, and on a plane this afternoon for Ft Lauderdale for booze and hookas.
Next week, Runninghot's house of booze and debauchery
