Offshoreonly.com
Page 11 of 22
« First
9
10
11
12
13
21
Last »
Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Boating Discussion (https://www.offshoreonly.com/forums/general-boating-discussion-51/)
-   -   Whipple 600sci upgrade documentation (https://www.offshoreonly.com/forums/general-boating-discussion/220230-whipple-600sci-upgrade-documentation.html)

Beak Boater 12-07-2009 06:38 AM
Originally Posted by saxman (Post 3001650)
What about other people with the same boat? There are a fair number of fountains (38's, 42's) with 700's......... Fountain didn't help at all or get their chit together?
Sorry to hear about your water problems. Our 38/700 has never had any water pressure issues, have owned it 3 years. Their are also 2 other 42/700 boats that were bought last spring in our area that dont have them either. Glad you got it worked out.

Bullhead 12-07-2009 09:48 AM
Originally Posted by gnorthga (Post 3001951)
Does your BoAt havE 1075?
I have 700's....the boat in my avatar,Saratoga Stampede, has 1075's (for now)

Bullhead 12-07-2009 09:56 AM
Originally Posted by aTX427 (Post 3001987)
It is a lot eaiser to go with more boost than changing the cam, but I will probably do cams, pushrods, lifters, springs and head gaskets at 250.
Cool....sounds like a more reliable upgrade than just adding boost....are you going to Dyno?

Whipple Charged 12-07-2009 01:26 PM
Originally Posted by gnorthga (Post 3001880)
How much is to much water pressure
50psi IMO

gnorthga 12-07-2009 02:34 PM
Originally Posted by aTX427 (Post 3001987)
It is a lot eaiser to go with more boost than changing the cam, but I will probably do cams, pushrods, lifters, springs and head gaskets at 250.
ARE WE TALKING ABOUT A 600 OR 700 MOTOR?

Whipple Charged 12-07-2009 06:10 PM
Originally Posted by gnorthga (Post 3002236)
ARE WE TALKING ABOUT A 600 OR 700 MOTOR?
This would be the 600, although were working on a camshaft change for the 700 too :)

Back4More 12-07-2009 06:19 PM
we're pushing the limits of the bottom end?

aTX427 12-08-2009 10:40 AM
Everything is forged, they have blower pistons and rings gapped for boost.

Back4More 12-08-2009 12:20 PM
I mean't the block...

Whipple Charged 12-08-2009 01:45 PM
Originally Posted by Back4More (Post 3002736)
I mean't the block...
Made 1000hp on those blocks for years with zero issues. Now if you had a big roots on there and tried to make 1000hp, thats different. Zero issues with the block.


All times are GMT -5. The time now is 12:06 PM.
Page 11 of 22
« First
9
10
11
12
13
21
Last »
Show 40 post(s) from this thread on one page


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.