Crane Cams?
11-24-2009 | 01:30 PM
#1
Thread Starter
Registered
Joined: Feb 2002
Posts: 6,656
Likes: 20
From: Lake Michigan
11-24-2009 | 02:27 PM
#2
VIP Member
Joined: Apr 2001
Posts: 4,213
Likes: 0
From: Chicago il
Looks like they are back under new ownership.
I would call Bob Madera if I needed a cam tho--
I would call Bob Madera if I needed a cam tho--
__________________
Want your ECU tuned right?? Call Mark at Precision www.pmefi.com
Want your ECU tuned right?? Call Mark at Precision www.pmefi.com
11-24-2009 | 03:22 PM
#3
Platinum Member
Joined: Jul 2003
Posts: 3,219
Likes: 1
From: Michigan
Yep they've closed manufacturing in Daytona and joined forces with S&S cycles quite awhile ago. Looking at the manufacturing equipment that sold from the old Crane facility and the equipment found at S&S cycles I'd have to say it was a good move from a quality standpoint.
11-25-2009 | 01:11 AM
#5
Charter Member # 55
Joined: Oct 2000
Posts: 20,241
Likes: 2,490
From: Omaha/LOTO
Some of the old grinds are available and some are not from what I have seen. Also the link Back4More posted is for Australia.
http://www.cranecams.com/
http://www.cranecams.com/?show=precatalog
http://www.cranecams.com/
http://www.cranecams.com/?show=precatalog
