Jesel Rocker Shafts
#1
Registered
Thread Starter
Join Date: Apr 2004
Location: Charlotte, NC
Posts: 217
Likes: 0
Received 0 Likes
on
0 Posts
Jesel Rocker Shafts
Jesel is having a 30% off sale on their Pro Series Rocker Shafts for Canfield heads..
According to Jesel, the pro series is the next step up from the Sportsman Series.
Anyone work with the Pro Series? Good? Bad? Worth it?
30% off is a nice savings.. They sell for $1649 with the 30% off they are $1155..
According to Jesel, the pro series is the next step up from the Sportsman Series.
Anyone work with the Pro Series? Good? Bad? Worth it?
30% off is a nice savings.. They sell for $1649 with the 30% off they are $1155..
#5
Registered
Thread Starter
Join Date: Apr 2004
Location: Charlotte, NC
Posts: 217
Likes: 0
Received 0 Likes
on
0 Posts
Machine work? humm.. that is not in the cards for the winter.. I have one/two more seasons on the motor before I pull it apart.. I was hoping this would be a simple bolt on install.. at least that is what the tech guy said..
T&D is also an option.. wonder if they have any special now that canfield is out of business
T&D is also an option.. wonder if they have any special now that canfield is out of business
#7
Registered
Unless you are running a solid roller with over 750 psi spring pressure, then the Sportsman series will bolt right up without any machine work. I have used them over 1400 hp without one problem.
Eddie
Eddie
#8
Registered
Thread Starter
Join Date: Apr 2004
Location: Charlotte, NC
Posts: 217
Likes: 0
Received 0 Likes
on
0 Posts
Thanks Eddie.. My cam is rather mild actually.. The rockers they have are the Pro Series.. They sold all of the Sportsman Series for the canfields already..
#9
Registered
Join Date: Feb 2001
Location: charlotte nc.
Posts: 1,849
Likes: 0
Received 0 Likes
on
0 Posts
John you might check with T&D i run them on my AFR's and they were bolt on but it does take a lot of set up to get them right. Also chances of your pushrods you have now working with any shaft rocker would be just luck.
#10
Registered
Thread Starter
Join Date: Apr 2004
Location: Charlotte, NC
Posts: 217
Likes: 0
Received 0 Likes
on
0 Posts
Thanks Mike. I am looking at the T&D also.. But 30% off for a Pro Series Jesel setup is a great deal..as long as they are bolt on that is..
Why did it take a lot to get it right? Want to do mine?? haha..
Perhaps it might be easier to just grab a new set of rockers and nuts.. skip the girdle... atleast I can keep my push rods..
Why did it take a lot to get it right? Want to do mine?? haha..
Perhaps it might be easier to just grab a new set of rockers and nuts.. skip the girdle... atleast I can keep my push rods..