![]() |
Oh My God, too many Beamers!!! Yikes.
You guys where Izod LaCoste shirts, Khaki's and Docksider shoes too?!?!?! :D j/k |
jbrauer- nice ride!
kelley- LOL! |
1 Attachment(s)
Here is my baby
Runs high 11's (and then I get tossed off track for no cage, firesuit, gloves, shoes, fire extinguisher ect) all NA no NITROUS and best part, she runs on stock 10 bolt with 2.73's |
Great ride..is that a solid lifter cam in that???? those are beautiful cars.
|
I call!
Jayl13, Please explain how you run high 11's without nitrous or a blower and 2.73 gears. I've got a '68 Camaro with a little over 400hp and 3.70 gears and run mid 12's.
|
Little thing called torque converter
Also car has a cam TQ converter is a 3750 stall and has a stall torque ratio of 2.75 so it multiplies out the ass Drag radials, intake lid and K&N, ported and polished MAF, Torque converter, Headers, Borla catback, Removeable cats and replace with straight race pipes, Cam, The engine is the LS1 and puts out a rated 320 HP (underated as per usual GM) Last time I dyno'ed it i put 372 to the street at the rear wheels Tq was 420 The LS1 is an all aluminum block and aluminum heads Basically a power house It is amazing what some of these engine builders are doing with these engines lately Lingenfelter can pull about 600+ hp out of them by opening them up to 427 cubes and putting turbos on it I have been told that a torque converter is considered cheating now cause it creates such a massive difference For those of you that done believe me take a gander over at www.ls1.com Read some of the results of the mods done to these cars Hell some of the stock 6 speeds with the 342's are pulling 12.8's bone stock Car is truly a sick automobile if you drove one, you would not ever question the speed and potential they have Jason |
1 Attachment(s)
OK, Jayl13...
WTF is this thing on LS1.com??? (not my car) |
OK, I figured out it is some type of overseas GM vehicle. They have a coupe model too on the site.
|
Damn dude I dont know
Funny as hell looking Is that a holden? (Holden is the Austrailian GM subdivision subsidiary) HAHAHAHA never saw that one before but hey GM is going down down down lately Not offering Antilock brakes or suplimental air bags as standard equipment anymore cause of the cost!!!!! but yet a loaded cavalier will run you upper 20's to possibly 30's for the high end model They discontinued the Camaro and firebird lines to make more SUV 's in that plant in Canada for sales dropped off for these cars. Sad but only performance car you can get from GM for now anyway is the vette Going to be a sad day when the last camaro/firechicken rolls out of there and they are done at the end of this summer Poor decision in my opinion but hey im just a consumer right? We are always wrong but yet that ugly ass armadillo aztek thing is getting redone and face lift Go figure........................... Jason |
http://www.holden.com.au
I'll be gosh-damn if GM ain't building some cool and wierd 'stuff' in Australia. They still have a 5.7L RWD Caprice!!!! |
| All times are GMT -5. The time now is 12:04 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.