Like Tree0Likes

intake manifold gasket question

Reply
Old 01-13-2010, 08:14 PM
  #1
Registered
Thread Starter
 
Join Date: May 2007
Posts: 117
Default intake manifold gasket question

hi looking for a better fitting intake gaskets for 598 tall deck dart heads,the felfro 1275 that i have been using seem to squrim out and dont fit wright around the water ports,any ideas or part numbers. thank all
joepequa is offline  
Reply With Quote
Old 01-13-2010, 08:43 PM
  #2
Registered
Thread Starter
 
Join Date: May 2007
Posts: 117
Default

hi
joepequa is offline  
Reply With Quote
Old 01-13-2010, 09:11 PM
  #3
Registered
Thread Starter
 
Join Date: May 2007
Posts: 117
Default

gasket
joepequa is offline  
Reply With Quote
Old 01-13-2010, 09:25 PM
  #4
Registered
 
Join Date: Aug 2005
Location: Point Pleasant/Demarest NJ
My Boats: 2006 32 Skater Qtr canopy
Posts: 1,017
Default

Your using the worng gasket. BB Chevy Felpro has 8 different intake gaskets. Look in the book they list one for those heads.
Pro1 is offline  
Reply With Quote
Old 01-13-2010, 09:38 PM
  #5
Platinum Member
Platinum Member
 
MER Performance's Avatar
 
Join Date: Jul 2008
Location: Little River SC
Posts: 938
Default

I use a custom made graphite with a stainless steel core, not some paper gasket that wicks water. If I can help further feel free to contact me.
MER Performance is offline  
Reply With Quote
Old 01-14-2010, 06:35 AM
  #6
Registered
Thread Starter
 
Join Date: May 2007
Posts: 117
Default

The intake and heads where opened up to the felpro 1275 gasket I will need a gasket that will match the port size any ideas thanks.
joepequa is offline  
Reply With Quote
Old 01-14-2010, 04:20 PM
  #7
Registered
Thread Starter
 
Join Date: May 2007
Posts: 117
Default

dart pro 1 and dart intake
joepequa is offline  
Reply With Quote
Old 01-14-2010, 06:32 PM
  #8
Registered
Thread Starter
 
Join Date: May 2007
Posts: 117
Default

hi
joepequa is offline  
Reply With Quote
Old 01-14-2010, 09:14 PM
  #9
Registered
 
H2Xmark's Avatar
 
Join Date: Apr 2001
Location: beaumont tx
My Boats: 1997 Fountain 35 Lightning
Posts: 1,703
Default

i have had good luck with the Hardin marine nitrile intake gaskets, no metal core so you can gasket match real easy, they stay in place, wont move, they look like they have a sticky type coating on both sides ,dont wick water like a paper gasket, and they make about 4 or 5 different types for big block chevy heads with and without upper bolts .
H2Xmark is offline  
Reply With Quote
Old 01-14-2010, 10:27 PM
  #10
Registered
Platinum Member
 
Boyd Racing Eng's Avatar
 
Join Date: Jul 2003
Posts: 107
Default

Use a 1275S-3 , It has a steel core and won't "squirm" out on you.
Boyd Racing Eng is offline  
Reply With Quote
Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -5. The time now is 09:15 PM.


Copyright 2011 OffShoreOnly. All rights reserved.