Gill exhausts with closed cooling?
04-13-2010, 09:02 PM
#11
Charter Member
Charter Member
Join Date: Nov 2000
Location: Lake Charles, LA USA
Posts: 1,094
Likes: 0
Received 0 Likes
on
0 Posts
Also, the gil riser/manifold flange does not flow water directly through it. water comes out of the manifold at the top and routes to the riser through hoses.
__________________
Long time cult member.
Long time cult member.
04-19-2010, 01:24 PM
#12
Registered
Thread Starter
interesting.
I copied the way the merc manifolds and risers were plubed up...fresh water in block and manifolds, raw out of heat exchanger and into the risers to be dumped overboard. Looks like it should work fine. These are stock 330 HP engines so I dont see a big problem.
I copied the way the merc manifolds and risers were plubed up...fresh water in block and manifolds, raw out of heat exchanger and into the risers to be dumped overboard. Looks like it should work fine. These are stock 330 HP engines so I dont see a big problem.
