Perko Sea Strainer
 

I need one post on my old Perkos.

The one that is on the outside that holds the top from the bottom.

I really dont wan to buy the whole thing unless I have to.

Have any of you guys seen one?? Hell I cannot even find a Perko dealer in the area.

pics?

http://www.go2marine.com/product.do?...F&WT.mc_id=gb1

I have blue fittings on it. Are those 1". I think

i have this one
-Mike

If it helps any let me know
-Mike

I am glad you brought this up because the bolts that hold down the cover on mine were stripped out. Some one put on Stainless nuts and they corroded out. I used a tap to get through the season but want to fix it correctly. Looks like you can still get the parts so that is cool!

I am going to measure the cylinder on mine. It looks longer than yours.

ok let me know ill see if i can help

How long are those posts????

On the outside of the cylinder.

ill get you a numbers in the am
-Mike

I think I have a parts breakdown for them, will check when I get to the office..

That would be great Scott. They sure are proud of the parts on those things! They get I think it was 25 bucks a bolt for those things! The threaded rods that hold the glass up they show as over 100 bucks..

Working on it now. Requested a breakdown on the first unit linked to, in a 1.25" size. Breakdown on Perko's site only lists the basics, handle, sleeve etc. I'll post what I get.

Audio, yours the same style? If not, go to Perko.com, type strainer in search and let me kow which one you have please.

6" top to bottom
-Mike

I have a PDF file with some parts infor covering the 4 and 500 series, can't post it here nor on photobucket. Emailable, ping me an email addy and I'll send it over...

madpoodle

aol
dot
com

pdf file
 

Would you e-mail it to me too at [email protected]
I have to replace my strainers.
Thanks,
Billy Frenz

I need the threaded rod.

Let me know

[email protected]

Brochure sent. Jon, I thought I had your email addy but don't apparently..

The one that I need is 6" from top to the start of the threads.

Mine is 6"'s from the the bottom to the top of the thread.
-Mikes

Same size?? Where do we get the damn things??

I am pretty sure that I have the flushing because I have a inlet from the flush system on the boat to the top of the strainer.

I'll email in the info to my vendor, see if they can help. Was a tad out of pocket today, saw your emails but could not respond. Hopefully I'll have some answers tomorrow..

I bought new strainers. So lie i said i have no use for this one. i sold the other one
-Mike

PM me the details. lets do this. Its starting to really put a hitch in the giddyup....blowing water everywhere and all.

PM is full

Empty now.

Is there anything special about the posts that one couldn't just use stainless threaded rod?? You probably can purchase threaded rod by the foot from McMaster Carr.

Well, so far I have been told the tie rods come as a set of four for the 400 series strainer, but are sold individually for the 500 series, yet the price is the same, and the 400 series come as a set only. And the BOTH use the same part number...

Not to mention the list on the set is 163 bucks?? When I pointed that out, they went back to the books to see if I could get a real answer..

Audio, I still have no idea which model yours is. I sent the other guys some breakdowns, maybe with that you can find yours??