Notices
General Boating Discussion

Perko Sea Strainer

Thread Tools
 
Old 04-04-2010 | 06:40 PM
  #1  
Thread Starter
Registered
 
Joined: Oct 2005
Posts: 389
Likes: 0
From: Lake Norman, NC
Default Perko Sea Strainer

I need one post on my old Perkos.

The one that is on the outside that holds the top from the bottom.

I really dont wan to buy the whole thing unless I have to.

Have any of you guys seen one?? Hell I cannot even find a Perko dealer in the area.
apppedigree is offline  
Reply
Old 04-04-2010 | 07:17 PM
  #2  
Sick Stinger's Avatar
Brotherhood #1
15 Year Member
Gold Member
 
Joined: Sep 2006
Posts: 12,026
Likes: 111
From: Swansea Mass
Default

pics?
Sick Stinger is offline  
Reply
Old 04-04-2010 | 07:52 PM
  #3  
Thread Starter
Registered
 
Joined: Oct 2005
Posts: 389
Likes: 0
From: Lake Norman, NC
Default

http://www.go2marine.com/product.do?...F&WT.mc_id=gb1

I have blue fittings on it. Are those 1". I think
apppedigree is offline  
Reply
Old 04-04-2010 | 08:28 PM
  #4  
Sick Stinger's Avatar
Brotherhood #1
15 Year Member
Gold Member
 
Joined: Sep 2006
Posts: 12,026
Likes: 111
From: Swansea Mass
Default

i have this one
-Mike
Attached Thumbnails Perko Sea Strainer-ss.jpg  
Sick Stinger is offline  
Reply
Old 04-04-2010 | 08:29 PM
  #5  
Sick Stinger's Avatar
Brotherhood #1
15 Year Member
Gold Member
 
Joined: Sep 2006
Posts: 12,026
Likes: 111
From: Swansea Mass
Default

If it helps any let me know
-Mike
Sick Stinger is offline  
Reply
Old 04-04-2010 | 08:38 PM
  #6  
Audiofn's Avatar
Charter Member #232
20 Year Member
Charter Member
Super Moderators
 
Joined: Oct 2000
Posts: 18,417
Likes: 6
From: Carlisle, MA USA
Default

I am glad you brought this up because the bolts that hold down the cover on mine were stripped out. Some one put on Stainless nuts and they corroded out. I used a tap to get through the season but want to fix it correctly. Looks like you can still get the parts so that is cool!
__________________
Put your best foot forward!
Audiofn is offline  
Reply
Old 04-05-2010 | 07:07 AM
  #7  
Thread Starter
Registered
 
Joined: Oct 2005
Posts: 389
Likes: 0
From: Lake Norman, NC
Default

Originally Posted by Sick Stinger
i have this one
-Mike
I am going to measure the cylinder on mine. It looks longer than yours.
apppedigree is offline  
Reply
Old 04-05-2010 | 08:47 AM
  #8  
Sick Stinger's Avatar
Brotherhood #1
15 Year Member
Gold Member
 
Joined: Sep 2006
Posts: 12,026
Likes: 111
From: Swansea Mass
Default

ok let me know ill see if i can help
Sick Stinger is offline  
Reply
Old 04-05-2010 | 11:37 AM
  #9  
Thread Starter
Registered
 
Joined: Oct 2005
Posts: 389
Likes: 0
From: Lake Norman, NC
Default

Originally Posted by Sick Stinger
i have this one
-Mike
How long are those posts????

On the outside of the cylinder.
apppedigree is offline  
Reply
Old 04-05-2010 | 10:45 PM
  #10  
Sick Stinger's Avatar
Brotherhood #1
15 Year Member
Gold Member
 
Joined: Sep 2006
Posts: 12,026
Likes: 111
From: Swansea Mass
Default

ill get you a numbers in the am
-Mike
Sick Stinger is offline  
Reply


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.