Raylar 600 going 650
 

Just back from Dyno

Mercruiser 496 HO
Raylar BCK 106 Kit
Raylar Stroker crankshaft with pistons
Lightning Headers
larger injectors
custom programmed PCM 555 on dyno for 90 octane fuel
650 + HP

almost 800 pounds torque ( 991 NM):grinser010:

nice :)

Wow, impressive! Great numbers

:drink::drink::drink:Your making me drool , Keep us posted ... Ray is shipping my motor home in the next couple days . Its will be spining a Whipple with his supercharger short block & Raylars aluminum heads with Dana exhaust. I'm hoping for somewhere between 700-725HP

I'm looking to do the same thing with mine. So what did it run you after it was all said and done???

There's Gold In Dem Dare Hills!
 

Great job Alfred! I keep telling people there is a lot of power available normally aspirated in a Raylar equipped 496 engine with the good parts and good programming!
This just proves what I keep saying all along and it shows that there are options versus supercharging for some nice big power and gobs of torque when the engine package is properly setup and equipped. One ends up with great usable power and the durability and engine life of a normally aspirated big inch 496 coupled with all the benefits of an efi, electronically managed, closed cooled relaible engine package without spending the whole family fortune to get there!

Best Regards,
Ray @ Raylar

Ray - What is the stroke in the 650 package?

I assume the bore is 30 over stock - right?

Torque is now about the same like a 700 SCI from Merc

Adios Bravo XR

Hello Imco SCX

Test Ride

Baja 25 Outlaw

Raylar 650 HP
30 `lab finished Bravo 1
1,5 Bravo XR Drive
elevation 1000 feet

GPS Speed 83 MPH @ 4950 RPM

85 should be possibel at sea level

Very, very cool.