bn

A while back Powerboat Magazine posted the parts and part numbers required to convert a 502 MPI to a 500 EFI. I think it was a Teague On Tech article. Does anyone know what year/month the article was in the magazine or know the parts and part numbers required for the conversion?

Airpacker

no but I have some of the parts.

Young Performance

I have an intake, throttle body, rails and injectors. Give me a shout if you are interested. Good luck finding the article. You may want to give Teague a call.
Eddie

Rattlesnake Jake

iTrader: (2)

I burned a piston in my 502 EFI, went .030 over JE 9.6:1, 315 CNC AFRs, complete 500EFI setup ( had 20 hours on it), Bob Madara hydraulic roller cam, EMI exhaust. Dynoed 572 HP @ 5400, 606 tq @ 4500 fully dressed. Ran flawless 2 years. Sold the boat this spring.

29KILROY

iTrader: (1)

Calll Rob @ HTG (716) 773-6131. He rebuilt my 454 Mags w/a Tyler Crockett ECM and it was AWESOME!!!

Heatseeker

I'm in the middle of a conversion right now. Teague's article was in the April 2008 edition of Powerboat Magazine. PM me if you want me to email it to you.

bn

Found it! Thank you!! You just saved me a few nights of flipping through PB magazines. I would love to hear how it goes and if you have any tips.


For those of you with parts, I am going to need parts for a set of twins. Please email me or PM me what you have and how much.

email: [email protected]

RUDelusional

email sent

Matt Trulio

Killer work, BN. I have to admit ... I don't even remember that article. I don't recall that kind of conversion being done as a feature. Was it a "Teague on Tech" piece?

Keytime

What was total cost on that job?