Offshoreonly.com - what make is this hull?

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Boating Discussion (https://www.offshoreonly.com/forums/general-boating-discussion-51/)

- - what make is this hull? (https://www.offshoreonly.com/forums/general-boating-discussion/239648-what-make-hull.html)

Quote:

Originally Posted by northernoffshore (Post 3215822)

spectra from calif.

Could be. "Racey" on "River Daves Place" could give you some more information on it if it is.

Roger

Yeah its a nice looking hull are you sure its one piece and not screwed then glassed over?

Marine Dynamics aka Clem Gem made in Michigan.
Here is a picture that a friend of mine (h2oboater) took of one back in the day.

Here are a couple of pictures that I just swiped off of River Daves Place for comparison. The orange and white one is for sale.

Quote:

Originally Posted by Lee (Post 3215958)

Marine Dynamics aka Clem Gem made in Michigan.
Here is a picture that a friend of mine (h2oboater) took of one back in the day.

Cool Looking boat!

Quote:

Originally Posted by ckienapple (Post 3215808)

maybe

should i get more pics?

Yes more pics :) and HIN#

Quote:

Originally Posted by Roger 1 (Post 3215960)

Here are a couple of pictures that I just swiped off of River Daves Place for comparison. The orange and white one is for sale.

Wouldn't think it was a Racey Roger .. totally diff deck.

Quote:

Originally Posted by moses0324 (Post 3215889)

def not a sonic...i dont have a clue.

id be a little concerned about the way its sitting on the wood. only 5 small support structures...i guess if its empty it doesnt weigh much but it looks like you would have a lot of local pressure on the hull

its on a trailer now, that's how the previous owner had it

Quote:

Originally Posted by Mark Smith (Post 3215855)

Now, all you need is $100000 and you can finish the boat in a year or so!!! Better off buying a complete boat.

just a budget boat, its not going to be anywhere as nice as others.

ill get some pictures when its completed

Quote:

Originally Posted by Griff (Post 3215825)

Not sure what it is, but it has very nice lines. Not a Sonic for sure. It has to be 2 parts that are glassed together. No way to make it as a single one piece hull.

If it has an HIN then you should be able to find out what it is.

HIN? hull indication number? and its 2 piece glassed together, but no screws

Quote:

Originally Posted by Lee (Post 3215958)

Marine Dynamics aka Clem Gem made in Michigan.
Here is a picture that a friend of mine (h2oboater) took of one back in the day.

looks like it!

Quote:

Originally Posted by 30ctsutphen (Post 3215956)

Yeah its a nice looking hull are you sure its one piece and not screwed then glassed over?

no screws just glassed together

Quote:

Originally Posted by NJgr8ful (Post 3215991)

Yes more pics :) and HIN#

Wouldn't think it was a Racey Roger .. totally diff deck.

will get more tommorow, going to work on it

yup ... HIN = Hull ID Number off the transom, usually top right side, when looking at transom. Or maybe I should say starboard stern :D

Quote:

Originally Posted by NJgr8ful (Post 3216197)

yup ... HIN = Hull ID Number off the transom, usually top right side, when looking at transom. Or maybe I should say starboard stern :D

ok ill get that in the pictures

heres the HIN#

hbgil28050678

i guess its a 78 lol

so how can i know what it is by this #