Ateco's latest project
10-20-2010 | 02:16 PM
#1
Thread Starter
Registered
Joined: Jun 2001
Posts: 2,303
Likes: 109
From: McHenry, Illinois
Ateco's latest project
I stopped by the shop yesterday and they are finishing up a very nice package. Pair of 572 CI 1000hp on pump gas. The plate under the air bonnet is a pressurized rail with 12 fuel injectors. Still waiting on some of the EFI parts and coil packs. The air bonnet is being painted to match. The flame arrestor is internal to the bonnet. So the cool looking throttle bodies are on display. Customer wanted a low boost, pump gas reliable package. Lot more power could be had with this setup.
10-20-2010 | 04:01 PM
#3
VIP Member
Joined: Jan 2002
Posts: 2,998
Likes: 112
I stopped by the shop yesterday and they are finishing up a very nice package. Pair of 572 CI 1000hp on pump gas. The plate under the air bonnet is a pressurized rail with 12 fuel injectors. Still waiting on some of the EFI parts and coil packs. The air bonnet is being painted to match. The flame arrestor is internal to the bonnet. So the cool looking throttle bodies are on display. Customer wanted a low boost, pump gas reliable package. Lot more power could be had with this setup.
Also Keith Eickerts new valve covers,.....very nice products!
Thanks for sharing
Jon
__________________
