New Intercoolers for big power
 

I just saw a new intercooler that Dennis and Jason ( formerly PF Marine ) have developed and are in early production on. It will have a billet aluminum housing for use on Roots or PSI blowers. Designed to replace your present intercooler and to be used in any marine application. They are going to use it on their 1500+hp, PSI supercharged engines. New company is going to be MarineIntercoolers.com and will be available in early Spring 2011.

not to rain on there parade its the opening on the blower thats to small it concentrats the air charge in one spot and doesnt spread it across the whole cooler need to address that way to spread out the discarge from the blower across the whole cooler my 3 cents wourth inflation

are those smooth tubes, no fins at all?

Looks like 143 tubes covered with fines. Those are what I'll be using under some PSIs. It's about time someone is going to give the so called best, some compatition. Bob

My eyes are so bad they looked like just oil cooler tubes w/ no fins - sorry getting old!

Aren't we all haha. Bob

Is a fuel mixture going though that or just air?

Gary, thanks for the post.

Here are some pics with the billet cases. We will be getting the cases polished, and there will be an option to have them anodized in several colors.

We are tentatively set to be testing the first week of January.

-Jason Parvey

Looks cool Jason , be interesting to see the diff in intake charge temp ....good luck :drink::drink:

Cool stuff Saxman, lets see some dyno pulls