BALLS.......should you clean them or just replace 'em?
01-07-2011 | 09:55 AM
#31
Forum Regulator
Joined: May 2001
Posts: 24,214
Likes: 1,612
From: Worldwide
To get back to topic, I don't run the chrome balls or the SS ones. They look like crap and end up with sharp spots due to wear.
http://www.etrailer.com/Balls/Curt/C40041.html
I prefer the machine finish hitch balls with the 25,000 - 30,000 lbs. weight ratings. I usually run them for 3 years and replace.
Based on the size of that shank, and the notches on the side of the ball, it looks like it's one of those chrome cheap Draw-tite balls that's only rated for 6000 lbs.
http://www.etrailer.com/Balls/Curt/C40041.html
I prefer the machine finish hitch balls with the 25,000 - 30,000 lbs. weight ratings. I usually run them for 3 years and replace.
Based on the size of that shank, and the notches on the side of the ball, it looks like it's one of those chrome cheap Draw-tite balls that's only rated for 6000 lbs.
01-07-2011 | 10:46 AM
#33
Ginger or Mary Ann?
Joined: Oct 2000
Posts: 11,030
Likes: 9
From: L
(I use the machined ones only also.)
__________________
Some people are like Slinkies - Not really good for anything, but they
bring a smile to your face when pushed down the stairs.
Some people are like Slinkies - Not really good for anything, but they
bring a smile to your face when pushed down the stairs.
Didn't clean it or nothin! 
01-13-2011 | 12:38 PM
#40
Registered
Joined: Sep 2001
Posts: 671
Likes: 0
From: Lakeway, TX (Austin/Lake Travis) / LOTO Gravois Arm
Beyond ball hygiene, it's a good idea to keep balls dropped and on the down-low year-round, as surefire protection against someone drunk and confused -- or just for the sheer spontaneous fun of it....ramming you from the rear.
