|
Who is it... PM me if you don't want to post. The suspense is killing me :)
|
Originally Posted by Wild
(Post 3345160)
The trailer is fine structurally, id put speedy on it right now and haul it with only 5 out of 6 good axles, its all cosmetic and some mechanical stuff, but it all adds up
Regardless, where I come from you borrow something in running order you return it the same way unless there were known problems before it left.:bsflag: |
Originally Posted by Wild
(Post 3345945)
HA, and he even admits they drove it over "TONS" of curbs because its so long, great stuff :angry-smiley-038:
|
Originally Posted by MES
(Post 3346032)
That explains why some of the wheels look as is if they were drug against a concrete curb for 100 miles. I can get past a lot of the things that were wrong, but one thing that blows my mind is that they completely redid the bunk system on the cradle to fit their boat.
C'mon now is that even possible ?:drink: |
Originally Posted by Panther
(Post 3346015)
Not sticking up for the guy in any way but why does an axle, two tires, locked up brake and a new fender cost $7500??
Regardless, where I come from you borrow something in running order you return it the same way unless there were known problems before it left.:bsflag: |
Originally Posted by Panther
(Post 3346015)
Not sticking up for the guy in any way but why does an axle, two tires, locked up brake and a new fender cost $7500??
One Dexter torque axle 2 Semi trailer tires 3 Alcoa Wheels resurfaced Fenders and skirts need re-painted and pin stripped New Brake lines Several broken welds from hitting every curb from MO to FL The trailer was high centered and there are structural cracks on each side step. "involved party" completly removed all of the tilt bunks and altered them to fit his boat, they will have to be remade to fit MES 2 MTI's and Speedy. Storage compartments had hinges and locks drilled into place. Alot of paint work needs to be done........ |
Originally Posted by getchasum111
(Post 3345089)
sounds like that dip $hit from LOTO that has a 40 Skater huh
Why pick on the 40 Skater Guys in Missouri or lump us together we are all VERY different:angry-smiley-038: Randy that stinks !!! Jim Watson !!! |
I'm just so happy it wasn't me that borrowed the trailer, blocked Highway 54 for three hours and totaled it out this time. :party-smiley-004:
|
Originally Posted by nebraskabaja
(Post 3346047)
All of the custom PBB decals were removed from the trailer to add the "involved parties logos".
One Dexter torque axle 2 Semi trailer tires 3 Alcoa Wheels resurfaced Fenders and skirts need re-painted and pin stripped New Brake lines Several broken welds from hitting every curb from MO to FL The trailer was high centered and there are structural cracks on each side step. "involved party" completly removed all of the tilt bunks and altered them to fit his boat, they will have to be remade to fit MES 2 MTI's and Speedy. Storage compartments had hinges and locks drilled into place. Alot of paint work needs to be done........ :worthless_without_p |
Originally Posted by nebraskabaja
(Post 3346047)
All of the custom PBB decals were removed from the trailer to add the "involved parties logos".
One Dexter torque axle 2 Semi trailer tires 3 Alcoa Wheels resurfaced Fenders and skirts need re-painted and pin stripped New Brake lines Several broken welds from hitting every curb from MO to FL The trailer was high centered and there are structural cracks on each side step. "involved party" completly removed all of the tilt bunks and altered them to fit his boat, they will have to be remade to fit MES 2 MTI's and Speedy. Storage compartments had hinges and locks drilled into place. Alot of paint work needs to be done........ I usually dont rant on these types of threads but this person needs outed so no one else gets abused like this..:eek: |
| All times are GMT -5. The time now is 12:03 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.