525sc Crank Pulley
04-28-2011 | 09:56 AM
#1
Thread Starter
Registered
Joined: Feb 2008
Posts: 148
Likes: 0
525sc Crank Pulley
A 525sc had a one piece crank pulley with 3 v belts and a 10 groove serpentine to run the blower? Was the crank pulley 6" and the blower pulley 3"? Anyone know where I could get my hands on a used 525 crank pulley since they are no longer available? A 6" 10 groove insert is not available from what I can tell. Thanks
04-28-2011 | 12:40 PM
#3
Thread Starter
Registered
Joined: Feb 2008
Posts: 148
Likes: 0
Ok thanks makes sense they only offer an add on 7" pulley but means I'll need to find a 3.5" top now or bigger because I have a 3". Hoping to find used I'm getting a fortune tied up in this thing found a mag motor putting the inconel valves, head gaskets etc in it so its good to go. If anyone is looking for the 10 rib gates belts for these a guy is selling them on ebay for $15 for 2 shipped.
04-28-2011 | 01:32 PM
#4
Banned
Joined: Sep 2007
Posts: 12,849
Likes: 3
From: Frankfort,ill
Ok thanks makes sense they only offer an add on 7" pulley but means I'll need to find a 3.5" top now or bigger because I have a 3". Hoping to find used I'm getting a fortune tied up in this thing found a mag motor putting the inconel valves, head gaskets etc in it so its good to go. If anyone is looking for the 10 rib gates belts for these a guy is selling them on ebay for $15 for 2 shipped.
