Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Boating Discussion (https://www.offshoreonly.com/forums/general-boating-discussion-51/)
-   -   Center Console Ideas (https://www.offshoreonly.com/forums/general-boating-discussion/252866-center-console-ideas.html)

Statement1 05-06-2011 09:37 AM

Statement Marine has expanded into the Center Console market, with multiple Center Consoles in production as we speak. 2 Diesel 37's and 2 outboard 34's. One of the outboards is still available. 10' beam, 34' length, twin or triple outboards of your choice.....priced right! Custom built to your specifications. Stepped bottom, twin 300 Verados runs 65mph.
Statement Marine only builds state of the art boats, top of the line quality and impressive attention to detail and outstanding performance!

www.statementmarine.com
727-525-5235

THEJOKER 05-06-2011 01:34 PM


Originally Posted by fantastixvoyage (Post 3396346)
Are companies doing the console as part of the liner or as a seperate piece?

Ours is a seperate piece. Aluminum L brackets , lagged in the stringers and glassed in from the inside. This supports a huge Birdsall Hardtop.

THEJOKER 05-06-2011 01:37 PM

1 Attachment(s)
Build a big sunpad for the girls to lay out on. Then make the storage area under it so big blocks or Yanmars can fit under there.

THEJOKER 05-06-2011 01:41 PM

1 Attachment(s)
This shows the sun pad better.

THEJOKER 05-06-2011 08:13 PM

1 Attachment(s)
Storage area under the sun pad. The entire area is all a finished part.

marine concepts 05-06-2011 10:22 PM


Originally Posted by wananewboat (Post 3396296)
Has a Poseidon 2 been built with twin 300s and if so what would the speed be?

We shut off center motor and it still ran in the 50's

marylandmark 05-07-2011 07:35 AM


Originally Posted by marylandmark
Pete- 32'6 is the LOA which includes the bracket. 30 hull with 2'6" bracket. USCG makes them measure so.


Originally Posted by Pete280 (Post 3396038)
somebody believes it's a CG requirement

Above measurements are for my Concept 326. The bracket has to be counted in the documented length per the Coast Guard because it "contributes to the flotation".

See in this pic, how the bracket is not just the platform one stands on but also has "hull properties" (my word for lack of knowing what else to call it).

My terms may be wrong, like LOA should include every thing including motors, where LWL is length at water line and LOD is length on dock and so on; either way no matter what one calls it, the hull is 30' and the bracket is 2'6". I'm 37' on trailer which means it fits in my garage which is good 'nuff for me.

http://www.conceptboats.com/images/s...e/DSC_9849.jpg

bcschoe 05-07-2011 09:07 AM

I just had to put this here:

http://imaximaxges.smugmug.com/Offsh...539_z5Mcx-A-LB



http://imaximaxges.smugmug.com/Offsh...539_z5Mcx-A-LB

dkwestern 05-07-2011 11:57 AM


Originally Posted by marine concepts (Post 3396935)
We shut off center motor and it still ran in the 50's

What's it run with all 3 300's?

marine concepts 05-07-2011 03:41 PM


Originally Posted by dkwestern (Post 3397171)
What's it run with all 3 300's?

Mid 60's, and get there right now! 12,000 pounds


All times are GMT -5. The time now is 02:59 AM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.