Some nice new chunks taken out of the skeg...
05-28-2011, 05:17 PM
#1
Registered
Thread Starter
Join Date: Jan 2001
Location: Long Island, NY
Posts: 175
Likes: 0
Received 0 Likes
on
0 Posts
Some nice new chunks taken out of the skeg...
Forgot to trim it up today when retrieving it at the ramp. 
.
Can anything be done here? Sand it down maybe? Or some kinda bondo?
. Can anything be done here? Sand it down maybe? Or some kinda bondo?
05-29-2011, 07:54 AM
#4
Registered
iTrader: (2)
i don't see anything missing, best way to fix missing chunks is to weld some new aluminum in there if it is only one or two tiny spots you can probably do it without disassembling the drive. you can repaint it but it won't last like the factory finish.
05-29-2011, 04:49 PM
#5
Registered
Thread Starter
Join Date: Jan 2001
Location: Long Island, NY
Posts: 175
Likes: 0
Received 0 Likes
on
0 Posts
You can't see it from the pic, but right at the bottom its almost like grooves that were taken out. All scratched up and everything.
Charter Member
