and do the wrist pins oil through a hole drilled from the big end to the small end or do they have a hole on the small end only?

Joe, that is not a current Oliver,Lunati,Manley or Crower I beam rod. It is heavily peened and smoothed. Call Oliver in Grand Rapids. They make a thin wall bushing and can probably machine the bushings to the rod spec. That is a strange looking rod. Dan

Thanks everyone .

Ruben ,I have had no luck contacting Crower ,even by phone . Just sit on hold like everybody else does to you !:mad:

c-spray, thanks

h2xmark , Not sure about the rod .It's at the machine shop now and I can't remeber .

Dan ,Thanks , I'll try it . I found the old add where my boat was for sale a couple owners ago . It was in NY. The guys name is Dennis .He owns a machine shop ! Didn't get to talk to him yet . He's too buisy ......... MAybe he can shed some light . I'll try Oliver too .Maybe they will at least answer the phone !

Thanks !

I have a set of billet Crower rods and they look nothing like those you have. I also have a set of billet Lunati rods and they look nothing like those either. Good luck.