Sterling 1700-Powered Skater 388 Slated for Completion Next Week
#1
Correspondent
Correspondent
Thread Starter
Sterling 1700-Powered Skater 388 Slated for Completion Next Week
Almost there, http://speedonthewater.com/new-boats...next-week.html.
#2
Platinum Member
Platinum Member
read the article, thank you BTW..always a good read...
BUT..I disagree with Peter... He's using the wrong drives. Those #6's will not hold up for any long period of time. A good alternative would be ASD-8's but the proper set up would be with the10's.
http://www.arneson-industries.com/pa...ducts&id=asd10
BUT..I disagree with Peter... He's using the wrong drives. Those #6's will not hold up for any long period of time. A good alternative would be ASD-8's but the proper set up would be with the10's.
http://www.arneson-industries.com/pa...ducts&id=asd10
#4
Registered
read the article, thank you BTW..always a good read...
BUT..I disagree with Peter... He's using the wrong drives. Those #6's will not hold up for any long period of time. A good alternative would be ASD-8's but the proper set up would be with the10's.
http://www.arneson-industries.com/pa...ducts&id=asd10
BUT..I disagree with Peter... He's using the wrong drives. Those #6's will not hold up for any long period of time. A good alternative would be ASD-8's but the proper set up would be with the10's.
http://www.arneson-industries.com/pa...ducts&id=asd10
#6
Fast Priorty II Nor-Tech
Platinum Member
Talked to Pete last weekend at Boyne Thunder and his is not a fan of the new M8 drive but like stanless says what does he know
#8
arneson-industries.com
Offshoreonly Advertiser
You say this like a Surface Drive is a negative thing?
__________________
Arneson Surface Drives www.arneson-industries.com
Arneson Surface Drives www.arneson-industries.com