sneak attack warming up
08-01-2011, 10:36 AM
#11
Registered
Thread Starter
Join Date: Jun 2011
Location: St Amant La
Posts: 824
Likes: 0
Received 0 Likes
on
0 Posts
08-01-2011, 03:08 PM
#15
Registered
Thread Starter
Join Date: Jun 2011
Location: St Amant La
Posts: 824
Likes: 0
Received 0 Likes
on
0 Posts
thanks guys...
thats right.....the idle will clean up at 1400rpms but its hard on bravo drives to shift into gear anything over 1000rpms....it surges from 700 to 1200rpms and i shift it on the downside...
08-01-2011, 04:19 PM
#17
Registered
Thread Starter
Join Date: Jun 2011
Location: St Amant La
Posts: 824
Likes: 0
Received 0 Likes
on
0 Posts
running rich at idle...rich then lean at idle is the surge.....cam size duration timing and other factors are involved....mine is set up conservative....
08-01-2011, 06:55 PM
#19
Registered
Join Date: Aug 2009
Posts: 240
Likes: 0
Received 0 Likes
on
0 Posts
08-02-2011, 06:22 AM
#20
Registered
Thread Starter
Join Date: Jun 2011
Location: St Amant La
Posts: 824
Likes: 0
Received 0 Likes
on
0 Posts
thanks chris-
its a roller motor now and running 8lbs of boost so probably 925ish....1:30 b max drive spinning a 32 bravo at 5400ish rpms in the summer...i have a 12lb pulley and a 34 bravo that i put on when needed...
its a roller motor now and running 8lbs of boost so probably 925ish....1:30 b max drive spinning a 32 bravo at 5400ish rpms in the summer...i have a 12lb pulley and a 34 bravo that i put on when needed...
