Engine Cover With Rear Seat Back Combo
#1
Registered
Thread Starter
Engine Cover With Rear Seat Back Combo
I am building a new engine cover and thought about making the back of the rear bench seat part of the cover like alot of newer boats I think it might be eaiser to work on the engine belts pump alt ect. Is this worth doing?
#3
Registered
Join Date: Jun 2011
Posts: 396
Likes: 0
Received 0 Likes
on
0 Posts
#4
Registered
Thread Starter
thanks for input. Cutting out firewall would probably be a bad thing.My cobra doesn't have one. It does have a strong built bulkhead from the floor down and the rear bench sits on top of it. I was thinking of using 3/4 deckolite ,making and glassing a lower bench to the floor and into the sides. any thoughts or ideas
#7
VIP Member
iTrader: (1)
Also make sure that if you do it , that your hatch lift is up to the task of the increased weight.
__________________
Want your ECU tuned right?? Call Mark at Precision www.pmefi.com
Want your ECU tuned right?? Call Mark at Precision www.pmefi.com
#8
Registered
Thread Starter
should I build a flat fire wall which will be part of the engine cover and than bolt rear seat frame to it or do i build the rear seat frame as the firewall? I am building a plug and than a mold from that and than the engine cover and rear seat back from the mold out of fiber glass