Offshoreonly.com - Hydrohoist ?? disassembly in NE MD

Page 3 of 3

Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Boating Discussion (https://www.offshoreonly.com/forums/general-boating-discussion-51/)

- - Hydrohoist ?? disassembly in NE MD (https://www.offshoreonly.com/forums/general-boating-discussion/267147-hydrohoist-disassembly-ne-md.html)

BZ	12-14-2011 06:03 PM

Quote:

Originally Posted by fireboatpilot (Post 3570711)

You could probly get a local tow truck to lift them onto your trailer for a few bucks. Most of those guys have some rigging straps or chains they use for recoveries. Not a flat bed tow truck of course. call AAA when your ready to load or a little before. tel them you need a boom truck.

BINGO there is the way to do it.....

Larry D

12-14-2011 06:54 PM

take a grinder(cut off wheel) you will find most bolts frozen all you need is acouple of nylon straps ( don't use chain or cable) the tow truck with boom is good idea I called a construction rental place and rented a lift( boom type construction lift peti bone, jcb etc) 2 of us disambled 2 lifts and loaded in a full day
good luck

Larry

kilrbusa

12-14-2011 10:09 PM

Yes a wrecker w a extend-able boom will do the trick ...you could always get a guy w a boom truck but the wrecker is the most convenient and inexpensive.

Ran-Dom 32

12-18-2011 12:18 PM

2 Attachment(s)

Quote:

Originally Posted by Ran-Dom 32 (Post 3570606)

someone suggested I bring a cherry picker, I think that would do the trick

cherry picker actually worked really well, we had quite a load coming home, we could not fit everything on the trailer we had... so I will need to ship the cross members back to Detroit somehow

Ran-Dom 32

12-18-2011 02:03 PM

Quote:

Originally Posted by Philm (Post 3570401)

Where in MD? If you are getting it this week, I will help out depending on how far it is away.

Thanks again Phil, for checking out the lift & offering us a hand, we had no trouble disassembling, we were in & out in a couple hours, did'nt want to bother you on a weekend

Hank36

12-18-2011 02:11 PM

Lift removal

good job

All times are GMT -5. The time now is 02:41 PM.

Page 3 of 3

Show 40 post(s) from this thread on one page