Rear view camera/LCD marine system?
#4
Banned
Thread Starter
Join Date: Nov 2011
Posts: 88
Likes: 0
Received 0 Likes
on
0 Posts
#5
Registered
Join Date: Nov 2011
Posts: 219
Likes: 0
Received 0 Likes
on
0 Posts
#6
Platinum Member
Platinum Member
All the Garmin 4200 series and up have video inputs for cameras so you could use that for the video screen. I don't know if you can tie in a recorder as well.
#7
Banned
Thread Starter
Join Date: Nov 2011
Posts: 88
Likes: 0
Received 0 Likes
on
0 Posts
#8
Platinum Member
Platinum Member
#10
Registered
iTrader: (1)
One thing to keep in mind using a go pro is that the video will be reversed. Garmin and other manufactures actually make reverse image cameras that you can install. I installed one on my 28 Skater in the middle of the motors. I suggest hooking it up and playing with the position so that you can see if there is any blockage. Mine works great and I like the fact I do not have to worry about the battery going dead, camera getting knocked off etc. Camera is mounted about grab rail. Made a custom wedge to set the angle.
I have mine hooked to my 5208 as an input along with a Nightvision camera in the bow.
I have mine hooked to my 5208 as an input along with a Nightvision camera in the bow.