Indmar ls 6.2 supercharged marine engine
#11
Thread Starter
Banned
Joined: Nov 2011
Posts: 88
Likes: 0
#13
Registered
Joined: Mar 2008
Posts: 1,181
Likes: 2
From: Vancouver BC
Please post a link to where you can buy this engine for $5000 less then the three or four other manufacturers selling this package. Originalronza what's the name of the dealer that quoted you an even cheaper price? I'll buy a couple right now. Also, the 460lbs is for the base long block without marine accessories..
#14
Ilmor 7.4 / 522 thread
__________________
Retired! Boating full-time now.
Retired! Boating full-time now.
#15
Banned
Joined: Jul 2011
Posts: 9,594
Likes: 46
From: Ft. Worth TX
In 3 to 6 months as far as major OEM marine engines Mercruiser / Mercury Racing & Ilmor will be the only one's left offering Big Blocks everyone else either has all LS motors or at least one LS motor to replace their big block offering.
The weight as I was told by Indmar was 467 lbs for the base like the pic in the GM performance website as I called it a full long block - the block, intake manifold and heads are aluminum.
The weight as I was told by Indmar was 467 lbs for the base like the pic in the GM performance website as I called it a full long block - the block, intake manifold and heads are aluminum.
Last edited by BUP; 12-28-2011 at 11:05 AM.
#16
Registered

Joined: Sep 2001
Posts: 596
Likes: 33
Mastercraft has used ILMOR engines exclusively for about a year now. Ilmor offers a non-supercharged 522 horsepower engine with far better internals:
Ilmor 7.4 / 522 thread
Ilmor 7.4 / 522 thread
#17
Thread Starter
Banned
Joined: Nov 2011
Posts: 88
Likes: 0
Mastercraft has used ILMOR engines exclusively for about a year now. Ilmor offers a non-supercharged 522 horsepower engine with far better internals:
Ilmor 7.4 / 522 thread
Ilmor 7.4 / 522 thread
#19
Banned
Joined: Jul 2011
Posts: 9,594
Likes: 46
From: Ft. Worth TX
If I recall correctly I think the reason for the cast pistons was all the complaints on the auto side about the piston slap being forged aluminun years ago. After the motor was fully warmed up and the piston expanded from the heat the slap went away on most of them but not all. A cold motor the piston slap was pretty darn loud. Again I think the cast piston took care of the slap but not 100% 4 sure.
#20


