Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Boating Discussion (https://www.offshoreonly.com/forums/general-boating-discussion-51/)
-   -   it has arrived (project) (https://www.offshoreonly.com/forums/general-boating-discussion/26900-has-arrived-project.html)

Tantrum 07-19-2002 04:37 PM

Looks good, Perfection takes its time right ;)

T2x 07-19-2002 04:57 PM

Nasty.......Give my best to "Roxie the welder".......... Hope you guys have great times in the boat.

Regards

T2x

NASTY HABIT 07-19-2002 05:12 PM

thanks Tantrum.......I do enjoy doing things 2 o r3 times...:D

T2x I'll tell her...she just grins whenever I mention our trip up there..looking forward to another...take care

traviss 07-19-2002 05:17 PM

That looks great! Good luck with the rest of the install... :)

and like they said.. perfection takes time ;)

Travis

NASTY HABIT 07-19-2002 06:43 PM

Traviss did you get that piston taken care of ? What pistions were you running?

traviss 07-19-2002 06:53 PM

yes i did.... took motor out on the 2nd of july.. had a piston next day aired from florida and ordered a set of rings.. was running on the 4th... :D


They are SRP forged pistons ( #138103) My uncle thought the piston looked like it failed for no reason ( weak part of the piston) and our 2 stroke buddy thought it looked like detonation, but all the others were fine.. and my timing was only 32 total with 89 octane... now i burn 94 octane just incase that was the problem... I have 12 hrs on it since i put the new piston in.. we are off to cumberland next monday the 29th and taking it with us.. I sure hope she don't break on me, i'l have every tool we have and all the parts, but its hard to fix a shortblock on the lake LOL! I am dead broke, $300 in my bank account, i can't take a nother failure of this .. that problem cost me... $157 for the piston, $137 for the rings, and my trim pump that week $125... Thats a months pay for me.. i am running low, make enough to just buy gas, thats it. :( .. ... I'l have a pic of the piston when i get a camera out...

NASTY HABIT 07-19-2002 06:58 PM

that was a quick fix....good deal..running a bit low on the funds here too...just pressure tested my exhaust pipes I was gonna use....the weld at the flange is cracked on one....guess i have to bite the bullet and buy new exhaust...too scared to reweld it..I'll just worry about it all the time....

have a good time and be careful out there....seeya

NASTY HABIT 08-23-2002 07:27 PM

1 Attachment(s)
alright I'm done tinkering....am only lacking my fuel line from the pump to the carb ...it'll be fit in the morning...and everything put back together.....and hoping fired on sunday....

this was a scary day

NASTY HABIT 08-23-2002 07:28 PM

1 Attachment(s)
hope they are right..!!!:eek:

NASTY HABIT 08-23-2002 07:29 PM

1 Attachment(s)
drive back on....


All times are GMT -5. The time now is 10:53 AM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.